(%i1) batch(diffeq.max)
read and interpret file: /home/dennis/mastersource/mine/omnisode/diffeq.max
(%i2) load(stringproc)
(%o2) /usr/share/maxima/5.27.0/share/stringproc/stringproc.mac
(%i3) display_poles() := block([rad_given],
if glob_type_given_pole = 4 then (rad_given :
sqrt(expt(array_given_rad_poles , 2.0)
1, 2
+ expt(array_x - array_given_rad_poles , 2.0)),
1 1, 1
omniout_float(ALWAYS, "Radius of convergence (given) for eq 1 ", 4,
rad_given, 4, " "), omniout_float(ALWAYS,
"Order of pole (given) ", 4,
array_given_ord_poles , 4, " ")) elseif glob_type_given_pole = 3
1, 1
then omniout_str(ALWAYS, "NO POLE (given) for Equation 1")
else omniout_str(ALWAYS, "NO INFO (given) for Equation 1"),
if array_poles # glob_large_float then (omniout_float(ALWAYS,
1, 1
"Radius of convergence (ratio test) for eq 1 ", 4, array_poles , 4,
1, 1
" "), omniout_str(ALWAYS,
"Order of pole (ratio test) Not computed"))
else omniout_str(ALWAYS, "NO POLE (ratio test) for Equation 1"),
if (array_real_poles > 0.0) and (array_real_poles # glob_large_float)
1, 1 1, 1
then (omniout_float(ALWAYS,
"Radius of convergence (three term test) for eq 1 ", 4, array_real_poles ,
1, 1
4, " "), omniout_float(ALWAYS,
"Order of pole (three term test) ", 4, array_real_poles ,
1, 2
4, " ")) else omniout_str(ALWAYS,
"NO REAL POLE (three term test) for Equation 1"),
if (array_complex_poles > 0.0) and (array_complex_poles #
1, 1 1, 1
glob_large_float)
then (omniout_float(ALWAYS,
"Radius of convergence (six term test) for eq 1 ", 4,
array_complex_poles , 4, " "), omniout_float(ALWAYS,
1, 1
"Order of pole (six term test) ", 4,
array_complex_poles , 4, " ")) else omniout_str(ALWAYS,
1, 2
"NO COMPLEX POLE (six term test) for Equation 1"))
(%o3) display_poles() := block([rad_given],
if glob_type_given_pole = 4 then (rad_given :
sqrt(expt(array_given_rad_poles , 2.0)
1, 2
+ expt(array_x - array_given_rad_poles , 2.0)),
1 1, 1
omniout_float(ALWAYS, "Radius of convergence (given) for eq 1 ", 4,
rad_given, 4, " "), omniout_float(ALWAYS,
"Order of pole (given) ", 4,
array_given_ord_poles , 4, " ")) elseif glob_type_given_pole = 3
1, 1
then omniout_str(ALWAYS, "NO POLE (given) for Equation 1")
else omniout_str(ALWAYS, "NO INFO (given) for Equation 1"),
if array_poles # glob_large_float then (omniout_float(ALWAYS,
1, 1
"Radius of convergence (ratio test) for eq 1 ", 4, array_poles , 4,
1, 1
" "), omniout_str(ALWAYS,
"Order of pole (ratio test) Not computed"))
else omniout_str(ALWAYS, "NO POLE (ratio test) for Equation 1"),
if (array_real_poles > 0.0) and (array_real_poles # glob_large_float)
1, 1 1, 1
then (omniout_float(ALWAYS,
"Radius of convergence (three term test) for eq 1 ", 4, array_real_poles ,
1, 1
4, " "), omniout_float(ALWAYS,
"Order of pole (three term test) ", 4, array_real_poles ,
1, 2
4, " ")) else omniout_str(ALWAYS,
"NO REAL POLE (three term test) for Equation 1"),
if (array_complex_poles > 0.0) and (array_complex_poles #
1, 1 1, 1
glob_large_float)
then (omniout_float(ALWAYS,
"Radius of convergence (six term test) for eq 1 ", 4,
array_complex_poles , 4, " "), omniout_float(ALWAYS,
1, 1
"Order of pole (six term test) ", 4,
array_complex_poles , 4, " ")) else omniout_str(ALWAYS,
1, 2
"NO COMPLEX POLE (six term test) for Equation 1"))
(%i4) check_sign(x0, xf) := block([ret],
if xf > x0 then ret : 1.0 else ret : - 1.0, ret)
(%o4) check_sign(x0, xf) := block([ret],
if xf > x0 then ret : 1.0 else ret : - 1.0, ret)
(%i5) est_size_answer() := block([min_size], min_size : glob_large_float,
if omniabs(array_y ) < min_size then (min_size : omniabs(array_y ),
1 1
omniout_float(ALWAYS, "min_size", 32, min_size, 32, "")),
if min_size < 1.0 then (min_size : 1.0,
omniout_float(ALWAYS, "min_size", 32, min_size, 32, "")), min_size)
(%o5) est_size_answer() := block([min_size], min_size : glob_large_float,
if omniabs(array_y ) < min_size then (min_size : omniabs(array_y ),
1 1
omniout_float(ALWAYS, "min_size", 32, min_size, 32, "")),
if min_size < 1.0 then (min_size : 1.0,
omniout_float(ALWAYS, "min_size", 32, min_size, 32, "")), min_size)
(%i6) test_suggested_h() := block([max_estimated_step_error, hn_div_ho,
hn_div_ho_2, hn_div_ho_3, no_terms, est_tmp], max_estimated_step_error : 0.0,
no_terms : glob_max_terms, hn_div_ho : 0.5, hn_div_ho_2 : 0.25,
hn_div_ho_3 : 0.125, omniout_float(ALWAYS, "hn_div_ho", 32, hn_div_ho, 32,
""), omniout_float(ALWAYS, "hn_div_ho_2", 32, hn_div_ho_2, 32, ""),
omniout_float(ALWAYS, "hn_div_ho_3", 32, hn_div_ho_3, 32, ""),
est_tmp : omniabs(array_y hn_div_ho_3 + array_y hn_div_ho_2
no_terms no_terms - 1
+ array_y hn_div_ho + array_y ),
no_terms - 2 no_terms - 3
if est_tmp >= max_estimated_step_error then max_estimated_step_error :
est_tmp, omniout_float(ALWAYS, "max_estimated_step_error", 32,
max_estimated_step_error, 32, ""), max_estimated_step_error)
(%o6) test_suggested_h() := block([max_estimated_step_error, hn_div_ho,
hn_div_ho_2, hn_div_ho_3, no_terms, est_tmp], max_estimated_step_error : 0.0,
no_terms : glob_max_terms, hn_div_ho : 0.5, hn_div_ho_2 : 0.25,
hn_div_ho_3 : 0.125, omniout_float(ALWAYS, "hn_div_ho", 32, hn_div_ho, 32,
""), omniout_float(ALWAYS, "hn_div_ho_2", 32, hn_div_ho_2, 32, ""),
omniout_float(ALWAYS, "hn_div_ho_3", 32, hn_div_ho_3, 32, ""),
est_tmp : omniabs(array_y hn_div_ho_3 + array_y hn_div_ho_2
no_terms no_terms - 1
+ array_y hn_div_ho + array_y ),
no_terms - 2 no_terms - 3
if est_tmp >= max_estimated_step_error then max_estimated_step_error :
est_tmp, omniout_float(ALWAYS, "max_estimated_step_error", 32,
max_estimated_step_error, 32, ""), max_estimated_step_error)
(%i7) reached_interval() := block([ret],
if glob_check_sign array_x >= glob_check_sign glob_next_display
1
then ret : true else ret : false, return(ret))
(%o7) reached_interval() := block([ret],
if glob_check_sign array_x >= glob_check_sign glob_next_display
1
then ret : true else ret : false, return(ret))
(%i8) display_alot(iter) := block([abserr, analytic_val_y, ind_var,
numeric_val, relerr, term_no], if reached_interval()
then (if iter >= 0 then (ind_var : array_x ,
1
omniout_float(ALWAYS, "x[1] ", 33, ind_var, 20,
" "), analytic_val_y : exact_soln_y(ind_var),
omniout_float(ALWAYS, "y[1] (analytic) ", 33, analytic_val_y,
20, " "), term_no : 1, numeric_val : array_y ,
term_no
abserr : omniabs(numeric_val - analytic_val_y),
omniout_float(ALWAYS, "y[1] (numeric) ", 33, numeric_val,
20, " "), if omniabs(analytic_val_y) # 0.0
abserr 100.0
then (relerr : -----------------------,
omniabs(analytic_val_y)
if relerr > 1.0E-34 then glob_good_digits : 3 - floor(log10(relerr))
else glob_good_digits : 16) else (relerr : - 1.0, glob_good_digits : - 1),
if glob_iter = 1 then array_1st_rel_error : relerr
1
else array_last_rel_error : relerr, omniout_float(ALWAYS,
1
"absolute error ", 4, abserr, 20, " "),
omniout_float(ALWAYS, "relative error ", 4, relerr, 20,
"%"), omniout_int(INFO, "Correct digits ", 32,
glob_good_digits, 4, " "), omniout_float(ALWAYS,
"h ", 4, glob_h, 20, " "))))
(%o8) display_alot(iter) := block([abserr, analytic_val_y, ind_var,
numeric_val, relerr, term_no], if reached_interval()
then (if iter >= 0 then (ind_var : array_x ,
1
omniout_float(ALWAYS, "x[1] ", 33, ind_var, 20,
" "), analytic_val_y : exact_soln_y(ind_var),
omniout_float(ALWAYS, "y[1] (analytic) ", 33, analytic_val_y,
20, " "), term_no : 1, numeric_val : array_y ,
term_no
abserr : omniabs(numeric_val - analytic_val_y),
omniout_float(ALWAYS, "y[1] (numeric) ", 33, numeric_val,
20, " "), if omniabs(analytic_val_y) # 0.0
abserr 100.0
then (relerr : -----------------------,
omniabs(analytic_val_y)
if relerr > 1.0E-34 then glob_good_digits : 3 - floor(log10(relerr))
else glob_good_digits : 16) else (relerr : - 1.0, glob_good_digits : - 1),
if glob_iter = 1 then array_1st_rel_error : relerr
1
else array_last_rel_error : relerr, omniout_float(ALWAYS,
1
"absolute error ", 4, abserr, 20, " "),
omniout_float(ALWAYS, "relative error ", 4, relerr, 20,
"%"), omniout_int(INFO, "Correct digits ", 32,
glob_good_digits, 4, " "), omniout_float(ALWAYS,
"h ", 4, glob_h, 20, " "))))
(%i9) adjust_for_pole(h_param) := (block([hnew, sz2, tmp], hnew : h_param,
glob_normmax : glob_small_float, if omniabs(array_y_higher ) >
1, 1
glob_small_float then (tmp : omniabs(array_y_higher ),
1, 1
if tmp < glob_normmax then glob_normmax : tmp),
if glob_look_poles and (omniabs(array_pole ) > glob_small_float)
1
array_pole
1
and (array_pole # glob_large_float) then (sz2 : -----------,
1 10.0
if sz2 < hnew then (omniout_float(INFO, "glob_h adjusted to ", 20, h_param,
12, "due to singularity."), omniout_str(INFO, "Reached Optimal"),
return(hnew))), if not glob_reached_optimal_h
then (glob_reached_optimal_h : true, glob_curr_iter_when_opt :
glob_current_iter, glob_optimal_clock_start_sec : elapsed_time_seconds(),
glob_optimal_start : array_x ), hnew : sz2), return(hnew))
1
(%o9) adjust_for_pole(h_param) := (block([hnew, sz2, tmp], hnew : h_param,
glob_normmax : glob_small_float, if omniabs(array_y_higher ) >
1, 1
glob_small_float then (tmp : omniabs(array_y_higher ),
1, 1
if tmp < glob_normmax then glob_normmax : tmp),
if glob_look_poles and (omniabs(array_pole ) > glob_small_float)
1
array_pole
1
and (array_pole # glob_large_float) then (sz2 : -----------,
1 10.0
if sz2 < hnew then (omniout_float(INFO, "glob_h adjusted to ", 20, h_param,
12, "due to singularity."), omniout_str(INFO, "Reached Optimal"),
return(hnew))), if not glob_reached_optimal_h
then (glob_reached_optimal_h : true, glob_curr_iter_when_opt :
glob_current_iter, glob_optimal_clock_start_sec : elapsed_time_seconds(),
glob_optimal_start : array_x ), hnew : sz2), return(hnew))
1
(%i10) prog_report(x_start, x_end) := block([clock_sec, opt_clock_sec,
clock_sec1, expect_sec, left_sec, percent_done, total_clock_sec],
clock_sec1 : elapsed_time_seconds(), total_clock_sec :
convfloat(clock_sec1) - convfloat(glob_orig_start_sec),
glob_clock_sec : convfloat(clock_sec1) - convfloat(glob_clock_start_sec),
left_sec : - convfloat(clock_sec1) + convfloat(glob_orig_start_sec)
+ convfloat(glob_max_sec), expect_sec :
comp_expect_sec(convfloat(x_end), convfloat(x_start),
convfloat(glob_h) + convfloat(array_x ),
1
convfloat(clock_sec1) - convfloat(glob_orig_start_sec)),
opt_clock_sec : convfloat(clock_sec1)
- convfloat(glob_optimal_clock_start_sec),
glob_optimal_expect_sec : comp_expect_sec(convfloat(x_end),
convfloat(x_start), convfloat(glob_h) + convfloat(array_x ),
1
convfloat(opt_clock_sec)), glob_total_exp_sec :
total_clock_sec + glob_optimal_expect_sec,
percent_done : comp_percent(convfloat(x_end), convfloat(x_start),
convfloat(glob_h) + convfloat(array_x )), glob_percent_done : percent_done,
1
omniout_str_noeol(INFO, "Total Elapsed Time "),
omniout_timestr(convfloat(total_clock_sec)),
omniout_str_noeol(INFO, "Elapsed Time(since restart) "),
omniout_timestr(convfloat(glob_clock_sec)),
if convfloat(percent_done) < convfloat(100.0)
then (omniout_str_noeol(INFO, "Expected Time Remaining "),
omniout_timestr(convfloat(expect_sec)),
omniout_str_noeol(INFO, "Optimized Time Remaining "),
omniout_timestr(convfloat(glob_optimal_expect_sec)),
omniout_str_noeol(INFO, "Expected Total Time "),
omniout_timestr(convfloat(glob_total_exp_sec))),
omniout_str_noeol(INFO, "Time to Timeout "),
omniout_timestr(convfloat(left_sec)), omniout_float(INFO,
"Percent Done ", 33, percent_done, 4, "%"))
(%o10) prog_report(x_start, x_end) := block([clock_sec, opt_clock_sec,
clock_sec1, expect_sec, left_sec, percent_done, total_clock_sec],
clock_sec1 : elapsed_time_seconds(), total_clock_sec :
convfloat(clock_sec1) - convfloat(glob_orig_start_sec),
glob_clock_sec : convfloat(clock_sec1) - convfloat(glob_clock_start_sec),
left_sec : - convfloat(clock_sec1) + convfloat(glob_orig_start_sec)
+ convfloat(glob_max_sec), expect_sec :
comp_expect_sec(convfloat(x_end), convfloat(x_start),
convfloat(glob_h) + convfloat(array_x ),
1
convfloat(clock_sec1) - convfloat(glob_orig_start_sec)),
opt_clock_sec : convfloat(clock_sec1)
- convfloat(glob_optimal_clock_start_sec),
glob_optimal_expect_sec : comp_expect_sec(convfloat(x_end),
convfloat(x_start), convfloat(glob_h) + convfloat(array_x ),
1
convfloat(opt_clock_sec)), glob_total_exp_sec :
total_clock_sec + glob_optimal_expect_sec,
percent_done : comp_percent(convfloat(x_end), convfloat(x_start),
convfloat(glob_h) + convfloat(array_x )), glob_percent_done : percent_done,
1
omniout_str_noeol(INFO, "Total Elapsed Time "),
omniout_timestr(convfloat(total_clock_sec)),
omniout_str_noeol(INFO, "Elapsed Time(since restart) "),
omniout_timestr(convfloat(glob_clock_sec)),
if convfloat(percent_done) < convfloat(100.0)
then (omniout_str_noeol(INFO, "Expected Time Remaining "),
omniout_timestr(convfloat(expect_sec)),
omniout_str_noeol(INFO, "Optimized Time Remaining "),
omniout_timestr(convfloat(glob_optimal_expect_sec)),
omniout_str_noeol(INFO, "Expected Total Time "),
omniout_timestr(convfloat(glob_total_exp_sec))),
omniout_str_noeol(INFO, "Time to Timeout "),
omniout_timestr(convfloat(left_sec)), omniout_float(INFO,
"Percent Done ", 33, percent_done, 4, "%"))
(%i11) check_for_pole() := block([cnt, dr1, dr2, ds1, ds2, hdrc, m, n, nr1,
nr2, ord_no, rad_c, rcs, rm0, rm1, rm2, rm3, rm4, found_sing, h_new, ratio,
term, local_test, tmp_rad, tmp_ratio, prev_tmp_rad],
array_pole : glob_large_float, array_pole : glob_large_float,
1 2
tmp_rad : glob_large_float, prev_tmp_rad : glob_large_float,
tmp_ratio : glob_large_float, rad_c : glob_large_float,
array_poles : glob_large_float, array_poles : glob_large_float,
1, 1 1, 2
found_sing : 1, n : - 10 - 1 + glob_max_terms, cnt : 0,
while (cnt < 5) and (found_sing = 1) do (if (omniabs(array_y_higher ) =
1, n
0.0) or (omniabs(array_y_higher ) = 0.0) then found_sing : 0
1, 1 + n
array_y_higher glob_h
1, n tmp_rad
else (tmp_rad : omniabs(-------------------------), tmp_ratio : ------------,
array_y_higher prev_tmp_rad
1, 1 + n
if (cnt > 0) and (tmp_ratio < 2.0) and (tmp_ratio > 0.5)
then (if tmp_rad < rad_c then rad_c : tmp_rad) elseif cnt = 0
then (if tmp_rad < rad_c then rad_c : tmp_rad) elseif cnt > 0
then found_sing : 0), prev_tmp_rad : tmp_rad, cnt : 1 + cnt, n : 1 + n),
if found_sing = 1 then (if rad_c < array_pole
1
then (array_pole : rad_c, array_poles : rad_c)), n : glob_max_terms,
1 1, 1
m : - 1 - 1 + n, while (m >= 10) and ((omniabs(array_y_higher ) = 0.0)
1, m
or (omniabs(array_y_higher ) = 0.0)
1, m - 1
or (omniabs(array_y_higher ) = 0.0)) do m : m - 1,
1, m - 2
array_y_higher array_y_higher
1, m 1, m - 1
if m > 10 then (rm0 : ----------------------, rm1 : ----------------------,
array_y_higher array_y_higher
1, m - 1 1, m - 2
hdrc : convfloat(m) rm0 - convfloat(m - 1) rm1,
glob_h
if omniabs(hdrc) > 0.0 then (rcs : ------,
hdrc
rm1 convfloat((m - 2) (m - 2)) - rm0 convfloat(m - 3)
ord_no : -----------------------------------------------------,
hdrc
array_real_poles : rcs, array_real_poles : ord_no)
1, 1 1, 2
else (array_real_poles : glob_large_float,
1, 1
array_real_poles : glob_large_float))
1, 2
else (array_real_poles : glob_large_float,
1, 1
array_real_poles : glob_large_float), n : - 1 - 1 + glob_max_terms,
1, 2
cnt : 0, while (cnt < 5) and (n >= 10) do (if omniabs(array_y_higher ) #
1, n
0.0 then cnt : 1 + cnt else cnt : 0, n : n - 1), m : cnt + n,
if m <= 10 then (rad_c : glob_large_float, ord_no : glob_large_float)
array_y_higher array_y_higher
1, m 1, m - 1
else (rm0 : ----------------------, rm1 : ----------------------,
array_y_higher array_y_higher
1, m - 1 1, m - 2
array_y_higher array_y_higher
1, m - 2 1, m - 3
rm2 : ----------------------, rm3 : ----------------------,
array_y_higher array_y_higher
1, m - 3 1, m - 4
array_y_higher
1, m - 4
rm4 : ----------------------, nr1 : convfloat(m - 3) rm2
array_y_higher
1, m - 5
- 2.0 convfloat(m - 2) rm1 + convfloat(m - 1) rm0,
nr2 : convfloat(m - 4) rm3 - 2.0 convfloat(m - 3) rm2 + convfloat(m - 2) rm1,
- 1.0 2.0 - 1.0 - 1.0 2.0 - 1.0 5.0 8.0 3.0
dr1 : ----- + --- + -----, dr2 : ----- + --- + -----, ds1 : --- - --- + ---,
rm3 rm2 rm1 rm4 rm3 rm2 rm3 rm2 rm1
5.0 8.0 3.0
ds2 : --- - --- + ---, if (omniabs(nr1 dr2 - nr2 dr1) = 0.0)
rm4 rm3 rm2
or (omniabs(dr1) = 0.0) then (rad_c : glob_large_float,
ord_no : glob_large_float) else (if omniabs(nr1 dr2 - nr2 dr1) # 0.0
dr1 dr2 - ds2 dr1 + ds1 dr2
then (rcs : ---------------------------,
nr1 dr2 - nr2 dr1
rcs nr1 - ds1 convfloat(m)
ord_no : ------------- - ------------,
2.0 dr1 2.0
if omniabs(rcs) # 0.0 then (if rcs > 0.0 then rad_c : sqrt(rcs) omniabs(glob_h)
else rad_c : glob_large_float) else (rad_c : glob_large_float,
ord_no : glob_large_float)) else (rad_c : glob_large_float,
ord_no : glob_large_float)), array_complex_poles : rad_c,
1, 1
array_complex_poles : ord_no), if array_pole glob_ratio_of_radius <
1, 2 1
omniabs(glob_h) then (h_new : array_pole glob_ratio_of_radius, term : 1,
1
ratio : 1.0, while term <= glob_max_terms do (array_y :
term
array_y ratio, array_y_higher : array_y_higher ratio,
term 1, term 1, term
ratio h_new
array_x : array_x ratio, ratio : ---------------, term : 1 + term),
term term omniabs(glob_h)
glob_h : h_new), if reached_interval() then display_poles())
(%o11) check_for_pole() := block([cnt, dr1, dr2, ds1, ds2, hdrc, m, n, nr1,
nr2, ord_no, rad_c, rcs, rm0, rm1, rm2, rm3, rm4, found_sing, h_new, ratio,
term, local_test, tmp_rad, tmp_ratio, prev_tmp_rad],
array_pole : glob_large_float, array_pole : glob_large_float,
1 2
tmp_rad : glob_large_float, prev_tmp_rad : glob_large_float,
tmp_ratio : glob_large_float, rad_c : glob_large_float,
array_poles : glob_large_float, array_poles : glob_large_float,
1, 1 1, 2
found_sing : 1, n : - 10 - 1 + glob_max_terms, cnt : 0,
while (cnt < 5) and (found_sing = 1) do (if (omniabs(array_y_higher ) =
1, n
0.0) or (omniabs(array_y_higher ) = 0.0) then found_sing : 0
1, 1 + n
array_y_higher glob_h
1, n tmp_rad
else (tmp_rad : omniabs(-------------------------), tmp_ratio : ------------,
array_y_higher prev_tmp_rad
1, 1 + n
if (cnt > 0) and (tmp_ratio < 2.0) and (tmp_ratio > 0.5)
then (if tmp_rad < rad_c then rad_c : tmp_rad) elseif cnt = 0
then (if tmp_rad < rad_c then rad_c : tmp_rad) elseif cnt > 0
then found_sing : 0), prev_tmp_rad : tmp_rad, cnt : 1 + cnt, n : 1 + n),
if found_sing = 1 then (if rad_c < array_pole
1
then (array_pole : rad_c, array_poles : rad_c)), n : glob_max_terms,
1 1, 1
m : - 1 - 1 + n, while (m >= 10) and ((omniabs(array_y_higher ) = 0.0)
1, m
or (omniabs(array_y_higher ) = 0.0)
1, m - 1
or (omniabs(array_y_higher ) = 0.0)) do m : m - 1,
1, m - 2
array_y_higher array_y_higher
1, m 1, m - 1
if m > 10 then (rm0 : ----------------------, rm1 : ----------------------,
array_y_higher array_y_higher
1, m - 1 1, m - 2
hdrc : convfloat(m) rm0 - convfloat(m - 1) rm1,
glob_h
if omniabs(hdrc) > 0.0 then (rcs : ------,
hdrc
rm1 convfloat((m - 2) (m - 2)) - rm0 convfloat(m - 3)
ord_no : -----------------------------------------------------,
hdrc
array_real_poles : rcs, array_real_poles : ord_no)
1, 1 1, 2
else (array_real_poles : glob_large_float,
1, 1
array_real_poles : glob_large_float))
1, 2
else (array_real_poles : glob_large_float,
1, 1
array_real_poles : glob_large_float), n : - 1 - 1 + glob_max_terms,
1, 2
cnt : 0, while (cnt < 5) and (n >= 10) do (if omniabs(array_y_higher ) #
1, n
0.0 then cnt : 1 + cnt else cnt : 0, n : n - 1), m : cnt + n,
if m <= 10 then (rad_c : glob_large_float, ord_no : glob_large_float)
array_y_higher array_y_higher
1, m 1, m - 1
else (rm0 : ----------------------, rm1 : ----------------------,
array_y_higher array_y_higher
1, m - 1 1, m - 2
array_y_higher array_y_higher
1, m - 2 1, m - 3
rm2 : ----------------------, rm3 : ----------------------,
array_y_higher array_y_higher
1, m - 3 1, m - 4
array_y_higher
1, m - 4
rm4 : ----------------------, nr1 : convfloat(m - 3) rm2
array_y_higher
1, m - 5
- 2.0 convfloat(m - 2) rm1 + convfloat(m - 1) rm0,
nr2 : convfloat(m - 4) rm3 - 2.0 convfloat(m - 3) rm2 + convfloat(m - 2) rm1,
- 1.0 2.0 - 1.0 - 1.0 2.0 - 1.0 5.0 8.0 3.0
dr1 : ----- + --- + -----, dr2 : ----- + --- + -----, ds1 : --- - --- + ---,
rm3 rm2 rm1 rm4 rm3 rm2 rm3 rm2 rm1
5.0 8.0 3.0
ds2 : --- - --- + ---, if (omniabs(nr1 dr2 - nr2 dr1) = 0.0)
rm4 rm3 rm2
or (omniabs(dr1) = 0.0) then (rad_c : glob_large_float,
ord_no : glob_large_float) else (if omniabs(nr1 dr2 - nr2 dr1) # 0.0
dr1 dr2 - ds2 dr1 + ds1 dr2
then (rcs : ---------------------------,
nr1 dr2 - nr2 dr1
rcs nr1 - ds1 convfloat(m)
ord_no : ------------- - ------------,
2.0 dr1 2.0
if omniabs(rcs) # 0.0 then (if rcs > 0.0 then rad_c : sqrt(rcs) omniabs(glob_h)
else rad_c : glob_large_float) else (rad_c : glob_large_float,
ord_no : glob_large_float)) else (rad_c : glob_large_float,
ord_no : glob_large_float)), array_complex_poles : rad_c,
1, 1
array_complex_poles : ord_no), if array_pole glob_ratio_of_radius <
1, 2 1
omniabs(glob_h) then (h_new : array_pole glob_ratio_of_radius, term : 1,
1
ratio : 1.0, while term <= glob_max_terms do (array_y :
term
array_y ratio, array_y_higher : array_y_higher ratio,
term 1, term 1, term
ratio h_new
array_x : array_x ratio, ratio : ---------------, term : 1 + term),
term term omniabs(glob_h)
glob_h : h_new), if reached_interval() then display_poles())
(%i12) get_norms() := block([iii], if not glob_initial_pass
then (iii : 1, while iii <= glob_max_terms do (array_norms : 0.0,
iii
iii : 1 + iii), iii : 1, while iii <=
glob_max_terms do (if omniabs(array_y ) > array_norms
iii iii
then array_norms : omniabs(array_y ), iii : 1 + iii)))
iii iii
(%o12) get_norms() := block([iii], if not glob_initial_pass
then (iii : 1, while iii <= glob_max_terms do (array_norms : 0.0,
iii
iii : 1 + iii), iii : 1, while iii <=
glob_max_terms do (if omniabs(array_y ) > array_norms
iii iii
then array_norms : omniabs(array_y ), iii : 1 + iii)))
iii iii
(%i13) atomall() := block([kkk, order_d, adj2, adj3, temporary, term, temp,
temp2], array_tmp1 : array_const_0D1 array_x ,
1 1 1
array_tmp2 : array_const_0D2 + array_tmp1 , array_tmp3 : sqrt(array_tmp2 ),
1 1 1 1 1
array_tmp4 : arcsin(array_tmp3 ), array_tmp4_a1 : cos(array_tmp4 ),
1 1 1 1
array_tmp5 : array_tmp4 + array_const_0D0 ,
1 1 1
if not array_y_set_initial then (if 1 <= glob_max_terms
1, 2
then (temporary : array_tmp5 expt(glob_h, 1) factorial_3(0, 1),
1
array_y : temporary, array_y_higher : temporary,
2 1, 2
temporary 1.0
temporary : -------------, array_y_higher : temporary, 0)), kkk : 2,
glob_h 2, 1
array_tmp1 : array_const_0D1 array_x , array_tmp2 : array_tmp1 ,
2 1 2 2 2
array_tmp2
2
-----------
array_tmp3
1
array_tmp3 : -----------, temp : att(1, array_tmp4_a1, array_tmp4, 2),
2 2.0
array_tmp3 - temp
2
array_tmp4 : ------------------, temp2 : att(1, array_tmp3, array_tmp4, 1),
2 array_tmp4_a1
1
array_tmp4_a1 : - temp2, array_tmp5 : array_tmp4 ,
2 2 2
if not array_y_set_initial then (if 2 <= glob_max_terms
1, 3
then (temporary : array_tmp5 expt(glob_h, 1) factorial_3(1, 2),
2
array_y : temporary, array_y_higher : temporary,
3 1, 3
temporary 2.0
temporary : -------------, array_y_higher : temporary, 0)), kkk : 3,
glob_h 2, 2
- ats(3, array_tmp3, array_tmp3, 2)
-----------------------------------
array_tmp3
1
array_tmp3 : 0.0, array_tmp3 : -----------------------------------,
3 3 2.0
array_tmp3 - temp
3
temp : att(2, array_tmp4_a1, array_tmp4, 2), array_tmp4 : ------------------,
3 array_tmp4_a1
1
temp2 : att(2, array_tmp3, array_tmp4, 1), array_tmp4_a1 : - temp2,
3
array_tmp5 : array_tmp4 , if not array_y_set_initial
3 3 1, 4
then (if 3 <= glob_max_terms then (temporary :
array_tmp5 expt(glob_h, 1) factorial_3(2, 3), array_y : temporary,
3 4
temporary 3.0
array_y_higher : temporary, temporary : -------------,
1, 4 glob_h
array_y_higher : temporary, 0)), kkk : 4, array_tmp3 : 0.0,
2, 3 4
- ats(4, array_tmp3, array_tmp3, 2)
-----------------------------------
array_tmp3
1
array_tmp3 : -----------------------------------,
4 2.0
array_tmp3 - temp
4
temp : att(3, array_tmp4_a1, array_tmp4, 2), array_tmp4 : ------------------,
4 array_tmp4_a1
1
temp2 : att(3, array_tmp3, array_tmp4, 1), array_tmp4_a1 : - temp2,
4
array_tmp5 : array_tmp4 , if not array_y_set_initial
4 4 1, 5
then (if 4 <= glob_max_terms then (temporary :
array_tmp5 expt(glob_h, 1) factorial_3(3, 4), array_y : temporary,
4 5
temporary 4.0
array_y_higher : temporary, temporary : -------------,
1, 5 glob_h
array_y_higher : temporary, 0)), kkk : 5, array_tmp3 : 0.0,
2, 4 5
- ats(5, array_tmp3, array_tmp3, 2)
-----------------------------------
array_tmp3
1
array_tmp3 : -----------------------------------,
5 2.0
array_tmp3 - temp
5
temp : att(4, array_tmp4_a1, array_tmp4, 2), array_tmp4 : ------------------,
5 array_tmp4_a1
1
temp2 : att(4, array_tmp3, array_tmp4, 1), array_tmp4_a1 : - temp2,
5
array_tmp5 : array_tmp4 , if not array_y_set_initial
5 5 1, 6
then (if 5 <= glob_max_terms then (temporary :
array_tmp5 expt(glob_h, 1) factorial_3(4, 5), array_y : temporary,
5 6
temporary 5.0
array_y_higher : temporary, temporary : -------------,
1, 6 glob_h
array_y_higher : temporary, 0)), kkk : 6,
2, 5
while kkk <= glob_max_terms do (array_tmp3 : 0.0,
kkk
- ats(kkk, array_tmp3, array_tmp3, 2)
-------------------------------------
array_tmp3
1
array_tmp3 : -------------------------------------,
kkk 2.0
temp : att(kkk - 1, array_tmp4_a1, array_tmp4, 2),
array_tmp3 - temp
kkk
array_tmp4 : --------------------, temp2 :
kkk array_tmp4_a1
1
att(kkk - 1, array_tmp3, array_tmp4, 1), array_tmp4_a1 : - temp2,
kkk
array_tmp5 : array_tmp4 , order_d : 1,
kkk kkk
if order_d + kkk < glob_max_terms then (if not subscript(array_y_set_initial,
1, order_d + kkk) then (temporary : array_tmp5 expt(glob_h, order_d)
kkk
factorial_3(kkk - 1, - 1 + order_d + kkk), array_y : temporary,
order_d + kkk
array_y_higher : temporary, term : - 1 + order_d + kkk,
1, order_d + kkk
adj2 : - 1 + order_d + kkk, adj3 : 2, while term >=
1 do (if adj3 <= 1 + order_d then (if adj2 > 0
temporary convfp(adj2)
then temporary : ---------------------- else temporary : temporary,
glob_h
array_y_higher : temporary), term : term - 1, adj2 : adj2 - 1,
adj3, term
adj3 : 1 + adj3))), kkk : 1 + kkk))
(%o13) atomall() := block([kkk, order_d, adj2, adj3, temporary, term, temp,
temp2], array_tmp1 : array_const_0D1 array_x ,
1 1 1
array_tmp2 : array_const_0D2 + array_tmp1 , array_tmp3 : sqrt(array_tmp2 ),
1 1 1 1 1
array_tmp4 : arcsin(array_tmp3 ), array_tmp4_a1 : cos(array_tmp4 ),
1 1 1 1
array_tmp5 : array_tmp4 + array_const_0D0 ,
1 1 1
if not array_y_set_initial then (if 1 <= glob_max_terms
1, 2
then (temporary : array_tmp5 expt(glob_h, 1) factorial_3(0, 1),
1
array_y : temporary, array_y_higher : temporary,
2 1, 2
temporary 1.0
temporary : -------------, array_y_higher : temporary, 0)), kkk : 2,
glob_h 2, 1
array_tmp1 : array_const_0D1 array_x , array_tmp2 : array_tmp1 ,
2 1 2 2 2
array_tmp2
2
-----------
array_tmp3
1
array_tmp3 : -----------, temp : att(1, array_tmp4_a1, array_tmp4, 2),
2 2.0
array_tmp3 - temp
2
array_tmp4 : ------------------, temp2 : att(1, array_tmp3, array_tmp4, 1),
2 array_tmp4_a1
1
array_tmp4_a1 : - temp2, array_tmp5 : array_tmp4 ,
2 2 2
if not array_y_set_initial then (if 2 <= glob_max_terms
1, 3
then (temporary : array_tmp5 expt(glob_h, 1) factorial_3(1, 2),
2
array_y : temporary, array_y_higher : temporary,
3 1, 3
temporary 2.0
temporary : -------------, array_y_higher : temporary, 0)), kkk : 3,
glob_h 2, 2
- ats(3, array_tmp3, array_tmp3, 2)
-----------------------------------
array_tmp3
1
array_tmp3 : 0.0, array_tmp3 : -----------------------------------,
3 3 2.0
array_tmp3 - temp
3
temp : att(2, array_tmp4_a1, array_tmp4, 2), array_tmp4 : ------------------,
3 array_tmp4_a1
1
temp2 : att(2, array_tmp3, array_tmp4, 1), array_tmp4_a1 : - temp2,
3
array_tmp5 : array_tmp4 , if not array_y_set_initial
3 3 1, 4
then (if 3 <= glob_max_terms then (temporary :
array_tmp5 expt(glob_h, 1) factorial_3(2, 3), array_y : temporary,
3 4
temporary 3.0
array_y_higher : temporary, temporary : -------------,
1, 4 glob_h
array_y_higher : temporary, 0)), kkk : 4, array_tmp3 : 0.0,
2, 3 4
- ats(4, array_tmp3, array_tmp3, 2)
-----------------------------------
array_tmp3
1
array_tmp3 : -----------------------------------,
4 2.0
array_tmp3 - temp
4
temp : att(3, array_tmp4_a1, array_tmp4, 2), array_tmp4 : ------------------,
4 array_tmp4_a1
1
temp2 : att(3, array_tmp3, array_tmp4, 1), array_tmp4_a1 : - temp2,
4
array_tmp5 : array_tmp4 , if not array_y_set_initial
4 4 1, 5
then (if 4 <= glob_max_terms then (temporary :
array_tmp5 expt(glob_h, 1) factorial_3(3, 4), array_y : temporary,
4 5
temporary 4.0
array_y_higher : temporary, temporary : -------------,
1, 5 glob_h
array_y_higher : temporary, 0)), kkk : 5, array_tmp3 : 0.0,
2, 4 5
- ats(5, array_tmp3, array_tmp3, 2)
-----------------------------------
array_tmp3
1
array_tmp3 : -----------------------------------,
5 2.0
array_tmp3 - temp
5
temp : att(4, array_tmp4_a1, array_tmp4, 2), array_tmp4 : ------------------,
5 array_tmp4_a1
1
temp2 : att(4, array_tmp3, array_tmp4, 1), array_tmp4_a1 : - temp2,
5
array_tmp5 : array_tmp4 , if not array_y_set_initial
5 5 1, 6
then (if 5 <= glob_max_terms then (temporary :
array_tmp5 expt(glob_h, 1) factorial_3(4, 5), array_y : temporary,
5 6
temporary 5.0
array_y_higher : temporary, temporary : -------------,
1, 6 glob_h
array_y_higher : temporary, 0)), kkk : 6,
2, 5
while kkk <= glob_max_terms do (array_tmp3 : 0.0,
kkk
- ats(kkk, array_tmp3, array_tmp3, 2)
-------------------------------------
array_tmp3
1
array_tmp3 : -------------------------------------,
kkk 2.0
temp : att(kkk - 1, array_tmp4_a1, array_tmp4, 2),
array_tmp3 - temp
kkk
array_tmp4 : --------------------, temp2 :
kkk array_tmp4_a1
1
att(kkk - 1, array_tmp3, array_tmp4, 1), array_tmp4_a1 : - temp2,
kkk
array_tmp5 : array_tmp4 , order_d : 1,
kkk kkk
if order_d + kkk < glob_max_terms then (if not subscript(array_y_set_initial,
1, order_d + kkk) then (temporary : array_tmp5 expt(glob_h, order_d)
kkk
factorial_3(kkk - 1, - 1 + order_d + kkk), array_y : temporary,
order_d + kkk
array_y_higher : temporary, term : - 1 + order_d + kkk,
1, order_d + kkk
adj2 : - 1 + order_d + kkk, adj3 : 2, while term >=
1 do (if adj3 <= 1 + order_d then (if adj2 > 0
temporary convfp(adj2)
then temporary : ---------------------- else temporary : temporary,
glob_h
array_y_higher : temporary), term : term - 1, adj2 : adj2 - 1,
adj3, term
adj3 : 1 + adj3))), kkk : 1 + kkk))
log(x)
(%i14) log10(x) := ---------
log(10.0)
log(x)
(%o14) log10(x) := ---------
log(10.0)
(%i15) omniout_str(iolevel, str) := if glob_iolevel >= iolevel
then printf(true, "~a~%", string(str))
(%o15) omniout_str(iolevel, str) := if glob_iolevel >= iolevel
then printf(true, "~a~%", string(str))
(%i16) omniout_str_noeol(iolevel, str) :=
if glob_iolevel >= iolevel then printf(true, "~a", string(str))
(%o16) omniout_str_noeol(iolevel, str) :=
if glob_iolevel >= iolevel then printf(true, "~a", string(str))
(%i17) omniout_labstr(iolevel, label, str) :=
if glob_iolevel >= iolevel then printf(true, "~a = ~a~%", string(label),
string(str))
(%o17) omniout_labstr(iolevel, label, str) :=
if glob_iolevel >= iolevel then printf(true, "~a = ~a~%", string(label),
string(str))
(%i18) omniout_float(iolevel, prelabel, prelen, value, vallen, postlabel) :=
if glob_iolevel >= iolevel then (if vallen = 4
then printf(true, "~a = ~g ~s ~%", prelabel, value, postlabel)
else printf(true, "~a = ~g ~s ~%", prelabel, value, postlabel))
(%o18) omniout_float(iolevel, prelabel, prelen, value, vallen, postlabel) :=
if glob_iolevel >= iolevel then (if vallen = 4
then printf(true, "~a = ~g ~s ~%", prelabel, value, postlabel)
else printf(true, "~a = ~g ~s ~%", prelabel, value, postlabel))
(%i19) omniout_int(iolevel, prelabel, prelen, value, vallen, postlabel) :=
if glob_iolevel >= iolevel then (printf(true, "~a = ~d ~a~%", prelabel, value,
postlabel), newline())
(%o19) omniout_int(iolevel, prelabel, prelen, value, vallen, postlabel) :=
if glob_iolevel >= iolevel then (printf(true, "~a = ~d ~a~%", prelabel, value,
postlabel), newline())
(%i20) omniout_float_arr(iolevel, prelabel, elemnt, prelen, value, vallen,
postlabel) := if glob_iolevel >= iolevel
then (sprint(prelabel, "[", elemnt, "]=", value, postlabel), newline())
(%o20) omniout_float_arr(iolevel, prelabel, elemnt, prelen, value, vallen,
postlabel) := if glob_iolevel >= iolevel
then (sprint(prelabel, "[", elemnt, "]=", value, postlabel), newline())
(%i21) dump_series(iolevel, dump_label, series_name, arr_series, numb) :=
block([i], if glob_iolevel >= iolevel then (i : 1,
while i <= numb do (sprint(dump_label, series_name, "i = ", i, "series = ",
array_series ), newline(), i : 1 + i)))
i
(%o21) dump_series(iolevel, dump_label, series_name, arr_series, numb) :=
block([i], if glob_iolevel >= iolevel then (i : 1,
while i <= numb do (sprint(dump_label, series_name, "i = ", i, "series = ",
array_series ), newline(), i : 1 + i)))
i
(%i22) dump_series_2(iolevel, dump_label, series_name2, arr_series2, numb,
subnum, arr_x) := (array_series2, numb, subnum) :=
block([i, sub, ts_term], if glob_iolevel >= iolevel
then (sub : 1, while sub <= subnum do (i : 1,
while i <= num do (sprint(dump_label, series_name, "sub = ", sub, "i = ", i,
"series2 = ", array_series2 ), i : 1 + i), sub : 1 + sub)))
sub, i
(%o22) dump_series_2(iolevel, dump_label, series_name2, arr_series2, numb,
subnum, arr_x) := (array_series2, numb, subnum) :=
block([i, sub, ts_term], if glob_iolevel >= iolevel
then (sub : 1, while sub <= subnum do (i : 1,
while i <= num do (sprint(dump_label, series_name, "sub = ", sub, "i = ", i,
"series2 = ", array_series2 ), i : 1 + i), sub : 1 + sub)))
sub, i
(%i23) cs_info(iolevel, str) := if glob_iolevel >= iolevel
then sprint(concat("cs_info ", str, " glob_correct_start_flag = ",
glob_correct_start_flag, "glob_h := ", glob_h, "glob_reached_optimal_h := ",
glob_reached_optimal_h))
(%o23) cs_info(iolevel, str) := if glob_iolevel >= iolevel
then sprint(concat("cs_info ", str, " glob_correct_start_flag = ",
glob_correct_start_flag, "glob_h := ", glob_h, "glob_reached_optimal_h := ",
glob_reached_optimal_h))
(%i24) logitem_time(fd, secs_in) := block([days, days_int, hours, hours_int,
minutes, minutes_int, sec_int, seconds, secs, years, years_int],
secs : convfloat(secs_in), printf(fd, "
~%"),
secs
if secs >= 0 then (years_int : trunc(----------------),
glob_sec_in_year
sec_temp : mod(trunc(secs), trunc(glob_sec_in_year)),
sec_temp
days_int : trunc(---------------), sec_temp :
glob_sec_in_day
sec_temp
mod(sec_temp, trunc(glob_sec_in_day)), hours_int : trunc(----------------),
glob_sec_in_hour
sec_temp : mod(sec_temp, trunc(glob_sec_in_hour)),
sec_temp
minutes_int : trunc(------------------),
glob_sec_in_minute
sec_int : mod(sec_temp, trunc(glob_sec_in_minute)),
if years_int > 0 then printf(fd,
"= ~d Years ~d Days ~d Hours ~d Minutes ~d Seconds~%", years_int, days_int,
hours_int, minutes_int, sec_int) elseif days_int > 0
then printf(fd, "= ~d Days ~d Hours ~d Minutes ~d Seconds~%", days_int,
hours_int, minutes_int, sec_int) elseif hours_int > 0
then printf(fd, "= ~d Hours ~d Minutes ~d Seconds~%", hours_int, minutes_int,
sec_int) elseif minutes_int > 0 then printf(fd, "= ~d Minutes ~d Seconds~%",
minutes_int, sec_int) else printf(fd, "= ~d Seconds~%", sec_int))
else printf(fd, " Unknown~%"), printf(fd, " | ~%"))
(%o24) logitem_time(fd, secs_in) := block([days, days_int, hours, hours_int,
minutes, minutes_int, sec_int, seconds, secs, years, years_int],
secs : convfloat(secs_in), printf(fd, "~%"),
secs
if secs >= 0 then (years_int : trunc(----------------),
glob_sec_in_year
sec_temp : mod(trunc(secs), trunc(glob_sec_in_year)),
sec_temp
days_int : trunc(---------------), sec_temp :
glob_sec_in_day
sec_temp
mod(sec_temp, trunc(glob_sec_in_day)), hours_int : trunc(----------------),
glob_sec_in_hour
sec_temp : mod(sec_temp, trunc(glob_sec_in_hour)),
sec_temp
minutes_int : trunc(------------------),
glob_sec_in_minute
sec_int : mod(sec_temp, trunc(glob_sec_in_minute)),
if years_int > 0 then printf(fd,
"= ~d Years ~d Days ~d Hours ~d Minutes ~d Seconds~%", years_int, days_int,
hours_int, minutes_int, sec_int) elseif days_int > 0
then printf(fd, "= ~d Days ~d Hours ~d Minutes ~d Seconds~%", days_int,
hours_int, minutes_int, sec_int) elseif hours_int > 0
then printf(fd, "= ~d Hours ~d Minutes ~d Seconds~%", hours_int, minutes_int,
sec_int) elseif minutes_int > 0 then printf(fd, "= ~d Minutes ~d Seconds~%",
minutes_int, sec_int) else printf(fd, "= ~d Seconds~%", sec_int))
else printf(fd, " Unknown~%"), printf(fd, " | ~%"))
(%i25) omniout_timestr(secs_in) := block([days, days_int, hours, hours_int,
minutes, minutes_int, sec_int, seconds, secs, years, years_int],
secs : convfloat(secs_in), if secs >= 0
secs
then (years_int : trunc(----------------),
glob_sec_in_year
sec_temp : mod(trunc(secs), trunc(glob_sec_in_year)),
sec_temp
days_int : trunc(---------------), sec_temp :
glob_sec_in_day
sec_temp
mod(sec_temp, trunc(glob_sec_in_day)), hours_int : trunc(----------------),
glob_sec_in_hour
sec_temp : mod(sec_temp, trunc(glob_sec_in_hour)),
sec_temp
minutes_int : trunc(------------------),
glob_sec_in_minute
sec_int : mod(sec_temp, trunc(glob_sec_in_minute)),
if years_int > 0 then printf(true,
"= ~d Years ~d Days ~d Hours ~d Minutes ~d Seconds~%", years_int, days_int,
hours_int, minutes_int, sec_int) elseif days_int > 0
then printf(true, "= ~d Days ~d Hours ~d Minutes ~d Seconds~%", days_int,
hours_int, minutes_int, sec_int) elseif hours_int > 0
then printf(true, "= ~d Hours ~d Minutes ~d Seconds~%", hours_int,
minutes_int, sec_int) elseif minutes_int > 0
then printf(true, "= ~d Minutes ~d Seconds~%", minutes_int, sec_int)
else printf(true, "= ~d Seconds~%", sec_int)) else printf(true, " Unknown~%"))
(%o25) omniout_timestr(secs_in) := block([days, days_int, hours, hours_int,
minutes, minutes_int, sec_int, seconds, secs, years, years_int],
secs : convfloat(secs_in), if secs >= 0
secs
then (years_int : trunc(----------------),
glob_sec_in_year
sec_temp : mod(trunc(secs), trunc(glob_sec_in_year)),
sec_temp
days_int : trunc(---------------), sec_temp :
glob_sec_in_day
sec_temp
mod(sec_temp, trunc(glob_sec_in_day)), hours_int : trunc(----------------),
glob_sec_in_hour
sec_temp : mod(sec_temp, trunc(glob_sec_in_hour)),
sec_temp
minutes_int : trunc(------------------),
glob_sec_in_minute
sec_int : mod(sec_temp, trunc(glob_sec_in_minute)),
if years_int > 0 then printf(true,
"= ~d Years ~d Days ~d Hours ~d Minutes ~d Seconds~%", years_int, days_int,
hours_int, minutes_int, sec_int) elseif days_int > 0
then printf(true, "= ~d Days ~d Hours ~d Minutes ~d Seconds~%", days_int,
hours_int, minutes_int, sec_int) elseif hours_int > 0
then printf(true, "= ~d Hours ~d Minutes ~d Seconds~%", hours_int,
minutes_int, sec_int) elseif minutes_int > 0
then printf(true, "= ~d Minutes ~d Seconds~%", minutes_int, sec_int)
else printf(true, "= ~d Seconds~%", sec_int)) else printf(true, " Unknown~%"))
(%i26) ats(mmm_ats, arr_a, arr_b, jjj_ats) :=
block([iii_ats, lll_ats, ma_ats, ret_ats], ret_ats : 0.0,
if jjj_ats <= mmm_ats then (ma_ats : 1 + mmm_ats, iii_ats : jjj_ats,
while iii_ats <= mmm_ats do (lll_ats : ma_ats - iii_ats,
ret_ats : arr_a arr_b + ret_ats, iii_ats : 1 + iii_ats)),
iii_ats lll_ats
ret_ats)
(%o26) ats(mmm_ats, arr_a, arr_b, jjj_ats) :=
block([iii_ats, lll_ats, ma_ats, ret_ats], ret_ats : 0.0,
if jjj_ats <= mmm_ats then (ma_ats : 1 + mmm_ats, iii_ats : jjj_ats,
while iii_ats <= mmm_ats do (lll_ats : ma_ats - iii_ats,
ret_ats : arr_a arr_b + ret_ats, iii_ats : 1 + iii_ats)),
iii_ats lll_ats
ret_ats)
(%i27) att(mmm_att, arr_aa, arr_bb, jjj_att) :=
block([al_att, iii_att, lll_att, ma_att, ret_att], ret_att : 0.0,
if jjj_att <= mmm_att then (ma_att : 2 + mmm_att, iii_att : jjj_att,
while iii_att <= mmm_att do (lll_att : ma_att - iii_att,
al_att : lll_att - 1, if lll_att <= glob_max_terms
then ret_att : arr_aa arr_bb convfp(al_att) + ret_att,
iii_att lll_att
ret_att
iii_att : 1 + iii_att), ret_att : ---------------), ret_att)
convfp(mmm_att)
(%o27) att(mmm_att, arr_aa, arr_bb, jjj_att) :=
block([al_att, iii_att, lll_att, ma_att, ret_att], ret_att : 0.0,
if jjj_att <= mmm_att then (ma_att : 2 + mmm_att, iii_att : jjj_att,
while iii_att <= mmm_att do (lll_att : ma_att - iii_att,
al_att : lll_att - 1, if lll_att <= glob_max_terms
then ret_att : arr_aa arr_bb convfp(al_att) + ret_att,
iii_att lll_att
ret_att
iii_att : 1 + iii_att), ret_att : ---------------), ret_att)
convfp(mmm_att)
(%i28) display_pole_debug(typ, m, radius, order2) :=
(if typ = 1 then omniout_str(ALWAYS, "Real")
else omniout_str(ALWAYS, "Complex"), omniout_int(ALWAYS, "m", 4, m, 4, " "),
omniout_float(ALWAYS, "DBG Radius of convergence ", 4, radius, 4, " "),
omniout_float(ALWAYS, "DBG Order of pole ", 4, order2, 4, " "))
(%o28) display_pole_debug(typ, m, radius, order2) :=
(if typ = 1 then omniout_str(ALWAYS, "Real")
else omniout_str(ALWAYS, "Complex"), omniout_int(ALWAYS, "m", 4, m, 4, " "),
omniout_float(ALWAYS, "DBG Radius of convergence ", 4, radius, 4, " "),
omniout_float(ALWAYS, "DBG Order of pole ", 4, order2, 4, " "))
(%i29) logditto(file) := (printf(file, ""), printf(file, "ditto"),
printf(file, " | "))
(%o29) logditto(file) := (printf(file, ""), printf(file, "ditto"),
printf(file, " | "))
(%i30) logitem_integer(file, n) := (printf(file, ""),
printf(file, "~d", n), printf(file, " | "))
(%o30) logitem_integer(file, n) := (printf(file, ""),
printf(file, "~d", n), printf(file, " | "))
(%i31) logitem_str(file, str) := (printf(file, ""), printf(file, str),
printf(file, " | "))
(%o31) logitem_str(file, str) := (printf(file, ""), printf(file, str),
printf(file, " | "))
(%i32) logitem_good_digits(file, rel_error) :=
block([good_digits], printf(file, ""),
if rel_error # - 1.0 then (if rel_error > + 1.0E-34
then (good_digits : 1 - floor(log10(rel_error)),
printf(file, "~d", good_digits)) else (good_digits : 16,
printf(file, "~d", good_digits))) else printf(file, "Unknown"),
printf(file, " | "))
(%o32) logitem_good_digits(file, rel_error) :=
block([good_digits], printf(file, ""),
if rel_error # - 1.0 then (if rel_error > + 1.0E-34
then (good_digits : 1 - floor(log10(rel_error)),
printf(file, "~d", good_digits)) else (good_digits : 16,
printf(file, "~d", good_digits))) else printf(file, "Unknown"),
printf(file, " | "))
(%i33) log_revs(file, revs) := printf(file, revs)
(%o33) log_revs(file, revs) := printf(file, revs)
(%i34) logitem_float(file, x) := (printf(file, ""), printf(file, "~g", x),
printf(file, " | "))
(%o34) logitem_float(file, x) := (printf(file, ""), printf(file, "~g", x),
printf(file, " | "))
(%i35) logitem_pole(file, pole) := (printf(file, ""),
if pole = 0 then printf(file, "NA") elseif pole = 1 then printf(file, "Real")
elseif pole = 2 then printf(file, "Complex") elseif pole = 4
then printf(file, "Yes") else printf(file, "No"), printf(file, " | "))
(%o35) logitem_pole(file, pole) := (printf(file, ""),
if pole = 0 then printf(file, "NA") elseif pole = 1 then printf(file, "Real")
elseif pole = 2 then printf(file, "Complex") elseif pole = 4
then printf(file, "Yes") else printf(file, "No"), printf(file, " | "))
(%i36) logstart(file) := printf(file, "")
(%o36) logstart(file) := printf(file, "
")
(%i37) logend(file) := printf(file, "
~%")
(%o37) logend(file) := printf(file, "~%")
(%i38) chk_data() := block([errflag], errflag : false,
if (glob_max_terms < 15) or (glob_max_terms > 512)
then (omniout_str(ALWAYS, "Illegal max_terms = -- Using 30"),
glob_max_terms : 30), if glob_max_iter < 2
then (omniout_str(ALWAYS, "Illegal max_iter"), errflag : true),
if errflag then quit())
(%o38) chk_data() := block([errflag], errflag : false,
if (glob_max_terms < 15) or (glob_max_terms > 512)
then (omniout_str(ALWAYS, "Illegal max_terms = -- Using 30"),
glob_max_terms : 30), if glob_max_iter < 2
then (omniout_str(ALWAYS, "Illegal max_iter"), errflag : true),
if errflag then quit())
(%i39) comp_expect_sec(t_end2, t_start2, t2, clock_sec2) :=
block([ms2, rrr, sec_left, sub1, sub2], ms2 : clock_sec2,
sub1 : t_end2 - t_start2, sub2 : t2 - t_start2,
if sub1 = 0.0 then sec_left : 0.0 else (if sub2 > 0.0
sub1
then (rrr : ----, sec_left : rrr ms2 - ms2) else sec_left : 0.0), sec_left)
sub2
(%o39) comp_expect_sec(t_end2, t_start2, t2, clock_sec2) :=
block([ms2, rrr, sec_left, sub1, sub2], ms2 : clock_sec2,
sub1 : t_end2 - t_start2, sub2 : t2 - t_start2,
if sub1 = 0.0 then sec_left : 0.0 else (if sub2 > 0.0
sub1
then (rrr : ----, sec_left : rrr ms2 - ms2) else sec_left : 0.0), sec_left)
sub2
(%i40) comp_percent(t_end2, t_start2, t2) :=
block([rrr, sub1, sub2], sub1 : t_end2 - t_start2, sub2 : t2 - t_start2,
100.0 sub2
if sub2 > glob_small_float then rrr : ---------- else rrr : 0.0, rrr)
sub1
(%o40) comp_percent(t_end2, t_start2, t2) :=
block([rrr, sub1, sub2], sub1 : t_end2 - t_start2, sub2 : t2 - t_start2,
100.0 sub2
if sub2 > glob_small_float then rrr : ---------- else rrr : 0.0, rrr)
sub1
(%i41) factorial_2(nnn) := nnn!
(%o41) factorial_2(nnn) := nnn!
(%i42) factorial_1(nnn) := block([ret],
if nnn <= glob_max_terms then (if array_fact_1 = 0
nnn
then (ret : factorial_2(nnn), array_fact_1 : ret)
nnn
else ret : array_fact_1 ) else ret : factorial_2(nnn), ret)
nnn
(%o42) factorial_1(nnn) := block([ret],
if nnn <= glob_max_terms then (if array_fact_1 = 0
nnn
then (ret : factorial_2(nnn), array_fact_1 : ret)
nnn
else ret : array_fact_1 ) else ret : factorial_2(nnn), ret)
nnn
(%i43) factorial_3(mmm, nnn) := block([ret],
if (nnn <= glob_max_terms) and (mmm <= glob_max_terms)
factorial_1(mmm)
then (if array_fact_2 = 0 then (ret : ----------------,
mmm, nnn factorial_1(nnn)
array_fact_2 : ret) else ret : array_fact_2 )
mmm, nnn mmm, nnn
factorial_2(mmm)
else ret : ----------------, ret)
factorial_2(nnn)
(%o43) factorial_3(mmm, nnn) := block([ret],
if (nnn <= glob_max_terms) and (mmm <= glob_max_terms)
factorial_1(mmm)
then (if array_fact_2 = 0 then (ret : ----------------,
mmm, nnn factorial_1(nnn)
array_fact_2 : ret) else ret : array_fact_2 )
mmm, nnn mmm, nnn
factorial_2(mmm)
else ret : ----------------, ret)
factorial_2(nnn)
(%i44) convfp(mmm) := mmm
(%o44) convfp(mmm) := mmm
(%i45) convfloat(mmm) := mmm
(%o45) convfloat(mmm) := mmm
(%i46) elapsed_time_seconds() := block([t], t : elapsed_real_time(), t)
(%o46) elapsed_time_seconds() := block([t], t : elapsed_real_time(), t)
(%i47) Si(x) := 0.0
(%o47) Si(x) := 0.0
(%i48) Ci(x) := 0.0
(%o48) Ci(x) := 0.0
(%i49) ln(x) := log(x)
(%o49) ln(x) := log(x)
(%i50) arcsin(x) := asin(x)
(%o50) arcsin(x) := asin(x)
(%i51) arccos(x) := acos(x)
(%o51) arccos(x) := acos(x)
(%i52) arctan(x) := atan(x)
(%o52) arctan(x) := atan(x)
(%i53) omniabs(x) := abs(x)
(%o53) omniabs(x) := abs(x)
(%i54) expt(x, y) := (if (x <= 0.0) and (y < 0.0)
y
then print("expt error x = ", x, "y = ", y), x )
(%o54) expt(x, y) := (if (x <= 0.0) and (y < 0.0)
y
then print("expt error x = ", x, "y = ", y), x )
(%i55) estimated_needed_step_error(x_start, x_end, estimated_h,
estimated_answer) := block([desired_abs_gbl_error, range, estimated_steps,
step_error], omniout_float(ALWAYS, "glob_desired_digits_correct", 32,
glob_desired_digits_correct, 32, ""), desired_abs_gbl_error :
expt(10.0, - glob_desired_digits_correct) omniabs(estimated_answer),
omniout_float(ALWAYS, "desired_abs_gbl_error", 32, desired_abs_gbl_error, 32,
""), range : x_end - x_start, omniout_float(ALWAYS, "range", 32, range, 32,
range
""), estimated_steps : -----------, omniout_float(ALWAYS, "estimated_steps",
estimated_h
desired_abs_gbl_error
32, estimated_steps, 32, ""), step_error : omniabs(---------------------),
estimated_steps
omniout_float(ALWAYS, "step_error", 32, step_error, 32, ""), step_error)
(%o55) estimated_needed_step_error(x_start, x_end, estimated_h,
estimated_answer) := block([desired_abs_gbl_error, range, estimated_steps,
step_error], omniout_float(ALWAYS, "glob_desired_digits_correct", 32,
glob_desired_digits_correct, 32, ""), desired_abs_gbl_error :
expt(10.0, - glob_desired_digits_correct) omniabs(estimated_answer),
omniout_float(ALWAYS, "desired_abs_gbl_error", 32, desired_abs_gbl_error, 32,
""), range : x_end - x_start, omniout_float(ALWAYS, "range", 32, range, 32,
range
""), estimated_steps : -----------, omniout_float(ALWAYS, "estimated_steps",
estimated_h
desired_abs_gbl_error
32, estimated_steps, 32, ""), step_error : omniabs(---------------------),
estimated_steps
omniout_float(ALWAYS, "step_error", 32, step_error, 32, ""), step_error)
(%i56) exact_soln_y(x) := block(- 5.0 arcsin(sqrt(0.2 + 0.1 x))
+ 5.0 sqrt(0.2 + 0.1 x) sqrt(0.8 - 0.1 x)
+ 10.0 (0.2 + 0.1 x) arcsin(sqrt(0.2 + 0.1 x)))
(%o56) exact_soln_y(x) := block(- 5.0 arcsin(sqrt(0.2 + 0.1 x))
+ 5.0 sqrt(0.2 + 0.1 x) sqrt(0.8 - 0.1 x)
+ 10.0 (0.2 + 0.1 x) arcsin(sqrt(0.2 + 0.1 x)))
(%i57) main() := block([d1, d2, d3, d4, est_err_2, niii, done_once, term, ord,
order_diff, term_no, html_log_file, iiif, jjjf, rows, r_order, sub_iter,
calc_term, iii, temp_sum, current_iter, x_start, x_end, it, max_terms,
opt_iter, tmp, subiter, est_needed_step_err, estimated_step_error, min_value,
est_answer, best_h, found_h, repeat_it],
define_variable(glob_max_terms, 30, fixnum),
define_variable(glob_iolevel, 5, fixnum),
define_variable(glob_yes_pole, 4, fixnum),
define_variable(glob_no_pole, 3, fixnum),
define_variable(glob_not_given, 0, fixnum),
define_variable(ALWAYS, 1, fixnum), define_variable(INFO, 2, fixnum),
define_variable(DEBUGL, 3, fixnum), define_variable(DEBUGMASSIVE, 4, fixnum),
define_variable(MAX_UNCHANGED, 10, fixnum),
define_variable(glob_check_sign, 1.0, float),
define_variable(glob_desired_digits_correct, 8.0, float),
define_variable(glob_max_estimated_step_error, 0.0, float),
define_variable(glob_ratio_of_radius, 0.1, float),
define_variable(glob_percent_done, 0.0, float),
define_variable(glob_subiter_method, 3, fixnum),
define_variable(glob_total_exp_sec, 0.1, float),
define_variable(glob_optimal_expect_sec, 0.1, float),
define_variable(glob_html_log, true, boolean),
define_variable(glob_good_digits, 0, fixnum),
define_variable(glob_max_opt_iter, 10, fixnum),
define_variable(glob_dump, false, boolean),
define_variable(glob_djd_debug, true, boolean),
define_variable(glob_display_flag, true, boolean),
define_variable(glob_djd_debug2, true, boolean),
define_variable(glob_sec_in_minute, 60, fixnum),
define_variable(glob_min_in_hour, 60, fixnum),
define_variable(glob_hours_in_day, 24, fixnum),
define_variable(glob_days_in_year, 365, fixnum),
define_variable(glob_sec_in_hour, 3600, fixnum),
define_variable(glob_sec_in_day, 86400, fixnum),
define_variable(glob_sec_in_year, 31536000, fixnum),
define_variable(glob_almost_1, 0.999, float),
define_variable(glob_clock_sec, 0.0, float),
define_variable(glob_clock_start_sec, 0.0, float),
define_variable(glob_not_yet_finished, true, boolean),
define_variable(glob_initial_pass, true, boolean),
define_variable(glob_not_yet_start_msg, true, boolean),
define_variable(glob_reached_optimal_h, false, boolean),
define_variable(glob_optimal_done, false, boolean),
define_variable(glob_disp_incr, 0.1, float),
define_variable(glob_h, 0.1, float), define_variable(glob_max_h, 0.1, float),
define_variable(glob_min_h, 1.0E-6, float),
define_variable(glob_type_given_pole, 0, fixnum),
define_variable(glob_large_float, 9.0E+100, float),
define_variable(glob_last_good_h, 0.1, float),
define_variable(glob_look_poles, false, boolean),
define_variable(glob_neg_h, false, boolean),
define_variable(glob_display_interval, 0.0, float),
define_variable(glob_next_display, 0.0, float),
define_variable(glob_dump_analytic, false, boolean),
define_variable(glob_abserr, 1.0E-11, float),
define_variable(glob_relerr, 1.0E-11, float),
define_variable(glob_max_hours, 0.0, float),
define_variable(glob_max_iter, 1000, fixnum),
define_variable(glob_max_rel_trunc_err, 1.0E-11, float),
define_variable(glob_max_trunc_err, 1.0E-11, float),
define_variable(glob_no_eqs, 0, fixnum),
define_variable(glob_optimal_clock_start_sec, 0.0, float),
define_variable(glob_optimal_start, 0.0, float),
define_variable(glob_small_float, 0.0, float),
define_variable(glob_smallish_float, 0.0, float),
define_variable(glob_unchanged_h_cnt, 0, fixnum),
define_variable(glob_warned, false, boolean),
define_variable(glob_warned2, false, boolean),
define_variable(glob_max_sec, 10000.0, float),
define_variable(glob_orig_start_sec, 0.0, float),
define_variable(glob_start, 0, fixnum),
define_variable(glob_curr_iter_when_opt, 0, fixnum),
define_variable(glob_current_iter, 0, fixnum),
define_variable(glob_iter, 0, fixnum),
define_variable(glob_normmax, 0.0, float),
define_variable(glob_max_minutes, 0.0, float), ALWAYS : 1, INFO : 2,
DEBUGL : 3, DEBUGMASSIVE : 4, glob_iolevel : INFO,
glob_orig_start_sec : elapsed_time_seconds(), MAX_UNCHANGED : 10,
glob_curr_iter_when_opt : 0, glob_display_flag : true, glob_no_eqs : 1,
glob_iter : - 1, opt_iter : - 1, glob_max_iter : 50000, glob_max_hours : 0.0,
glob_max_minutes : 15.0, omniout_str(ALWAYS,
"##############ECHO OF PROBLEM#################"), omniout_str(ALWAYS, "######\
########temp/arcsin_sqrtpostode.ode#################"),
omniout_str(ALWAYS, "diff ( y , x , 1 ) = arcsin(sqrt(0.1 * x + 0.2));"),
omniout_str(ALWAYS, "!"), omniout_str(ALWAYS,
"/* BEGIN FIRST INPUT BLOCK */"), omniout_str(ALWAYS, "Digits:32,"),
omniout_str(ALWAYS, "max_terms:30,"), omniout_str(ALWAYS, "!"),
omniout_str(ALWAYS, "/* END FIRST INPUT BLOCK */"),
omniout_str(ALWAYS, "/* BEGIN SECOND INPUT BLOCK */"),
omniout_str(ALWAYS, "x_start:0.0,"), omniout_str(ALWAYS, "x_end:0.5,"),
omniout_str(ALWAYS, "array_y_init[0 + 1] : exact_soln_y(x_start),"),
omniout_str(ALWAYS, "glob_look_poles:true,"),
omniout_str(ALWAYS, "glob_max_iter:1000000,"),
omniout_str(ALWAYS, "glob_display_interval:0.1,"),
omniout_str(ALWAYS, "glob_max_minutes:10,"),
omniout_str(ALWAYS, "/* END SECOND INPUT BLOCK */"),
omniout_str(ALWAYS, "/* BEGIN OVERRIDE BLOCK */"),
omniout_str(ALWAYS, "glob_desired_digits_correct:10,"),
omniout_str(ALWAYS, "glob_display_interval:0.01,"),
omniout_str(ALWAYS, "glob_look_poles:true,"),
omniout_str(ALWAYS, "glob_max_iter:10000000,"),
omniout_str(ALWAYS, "glob_max_minutes:3,"),
omniout_str(ALWAYS, "glob_subiter_method:3,"),
omniout_str(ALWAYS, "/* END OVERRIDE BLOCK */"), omniout_str(ALWAYS, "!"),
omniout_str(ALWAYS, "/* BEGIN USER DEF BLOCK */"),
omniout_str(ALWAYS, "exact_soln_y (x) := (block("), omniout_str(ALWAYS, " (10.\
0 * (0.1 * x + 0.2) * arcsin(sqrt ( 0.1 * x + 0.2)) + 5.0 * sqrt( 0.1 * x +"),
omniout_str(ALWAYS,
"0.2) * sqrt( 0.8 - 0.1 * x) - 5.0 * arcsin(sqrt( 0.1 * x + 0.2))) "),
omniout_str(ALWAYS, "));"), omniout_str(ALWAYS, "/* END USER DEF BLOCK */"),
omniout_str(ALWAYS, "#######END OF ECHO OF PROBLEM#################"),
glob_unchanged_h_cnt : 0, glob_warned : false, glob_warned2 : false,
glob_small_float : 0.0, glob_smallish_float : 0.0,
glob_large_float : 1.0E+100, glob_almost_1 : 0.99, Digits : 32,
max_terms : 30, glob_max_terms : max_terms, glob_html_log : true,
array(array_y_init, 1 + max_terms), array(array_norms, 1 + max_terms),
array(array_fact_1, 1 + max_terms), array(array_pole, 1 + 4),
array(array_real_pole, 1 + 4), array(array_complex_pole, 1 + 4),
array(array_1st_rel_error, 1 + 2), array(array_last_rel_error, 1 + 2),
array(array_type_pole, 1 + 2), array(array_type_real_pole, 1 + 2),
array(array_type_complex_pole, 1 + 2), array(array_y, 1 + max_terms),
array(array_x, 1 + max_terms), array(array_tmp0, 1 + max_terms),
array(array_tmp1, 1 + max_terms), array(array_tmp2, 1 + max_terms),
array(array_tmp3, 1 + max_terms), array(array_tmp4_a1, 1 + max_terms),
array(array_tmp4, 1 + max_terms), array(array_tmp5, 1 + max_terms),
array(array_m1, 1 + max_terms), array(array_y_higher, 1 + 2, 1 + max_terms),
array(array_y_higher_work, 1 + 2, 1 + max_terms),
array(array_y_higher_work2, 1 + 2, 1 + max_terms),
array(array_y_set_initial, 1 + 2, 1 + max_terms),
array(array_poles, 1 + 2, 1 + 3), array(array_given_rad_poles, 1 + 2, 1 + 3),
array(array_given_ord_poles, 1 + 2, 1 + 3),
array(array_real_poles, 1 + 2, 1 + 3),
array(array_complex_poles, 1 + 2, 1 + 3),
array(array_fact_2, 1 + max_terms, 1 + max_terms), term : 1,
while term <= max_terms do (array_y_init : 0.0, term : 1 + term),
term
term : 1, while term <= max_terms do (array_norms : 0.0,
term
term : 1 + term), term : 1, while term <=
max_terms do (array_fact_1 : 0.0, term : 1 + term), term : 1,
term
while term <= 4 do (array_pole : 0.0, term : 1 + term), term : 1,
term
while term <= 4 do (array_real_pole : 0.0, term : 1 + term), term : 1,
term
while term <= 4 do (array_complex_pole : 0.0, term : 1 + term), term : 1,
term
while term <= 2 do (array_1st_rel_error : 0.0, term : 1 + term),
term
term : 1, while term <= 2 do (array_last_rel_error : 0.0,
term
term : 1 + term), term : 1, while term <= 2 do (array_type_pole : 0.0,
term
term : 1 + term), term : 1, while term <=
2 do (array_type_real_pole : 0.0, term : 1 + term), term : 1,
term
while term <= 2 do (array_type_complex_pole : 0.0, term : 1 + term),
term
term : 1, while term <= max_terms do (array_y : 0.0, term : 1 + term),
term
term : 1, while term <= max_terms do (array_x : 0.0, term : 1 + term),
term
term : 1, while term <= max_terms do (array_tmp0 : 0.0, term : 1 + term),
term
term : 1, while term <= max_terms do (array_tmp1 : 0.0, term : 1 + term),
term
term : 1, while term <= max_terms do (array_tmp2 : 0.0, term : 1 + term),
term
term : 1, while term <= max_terms do (array_tmp3 : 0.0, term : 1 + term),
term
term : 1, while term <= max_terms do (array_tmp4_a1 : 0.0,
term
term : 1 + term), term : 1, while term <= max_terms do (array_tmp4 : 0.0,
term
term : 1 + term), term : 1, while term <= max_terms do (array_tmp5 : 0.0,
term
term : 1 + term), term : 1, while term <= max_terms do (array_m1 : 0.0,
term
term : 1 + term), ord : 1, while ord <= 2 do (term : 1,
while term <= max_terms do (array_y_higher : 0.0, term : 1 + term),
ord, term
ord : 1 + ord), ord : 1, while ord <= 2 do (term : 1,
while term <= max_terms do (array_y_higher_work : 0.0,
ord, term
term : 1 + term), ord : 1 + ord), ord : 1,
while ord <= 2 do (term : 1, while term <=
max_terms do (array_y_higher_work2 : 0.0, term : 1 + term),
ord, term
ord : 1 + ord), ord : 1, while ord <= 2 do (term : 1,
while term <= max_terms do (array_y_set_initial : 0.0,
ord, term
term : 1 + term), ord : 1 + ord), ord : 1,
while ord <= 2 do (term : 1, while term <= 3 do (array_poles : 0.0,
ord, term
term : 1 + term), ord : 1 + ord), ord : 1,
while ord <= 2 do (term : 1, while term <=
3 do (array_given_rad_poles : 0.0, term : 1 + term), ord : 1 + ord),
ord, term
ord : 1, while ord <= 2 do (term : 1,
while term <= 3 do (array_given_ord_poles : 0.0, term : 1 + term),
ord, term
ord : 1 + ord), ord : 1, while ord <= 2 do (term : 1,
while term <= 3 do (array_real_poles : 0.0, term : 1 + term),
ord, term
ord : 1 + ord), ord : 1, while ord <= 2 do (term : 1,
while term <= 3 do (array_complex_poles : 0.0, term : 1 + term),
ord, term
ord : 1 + ord), ord : 1, while ord <= max_terms do (term : 1,
while term <= max_terms do (array_fact_2 : 0.0, term : 1 + term),
ord, term
ord : 1 + ord), array(array_y, 1 + 1 + max_terms), term : 1,
while term <= 1 + max_terms do (array_y : 0.0, term : 1 + term),
term
array(array_x, 1 + 1 + max_terms), term : 1,
while term <= 1 + max_terms do (array_x : 0.0, term : 1 + term),
term
array(array_tmp0, 1 + 1 + max_terms), term : 1,
while term <= 1 + max_terms do (array_tmp0 : 0.0, term : 1 + term),
term
array(array_tmp1, 1 + 1 + max_terms), term : 1,
while term <= 1 + max_terms do (array_tmp1 : 0.0, term : 1 + term),
term
array(array_tmp2, 1 + 1 + max_terms), term : 1,
while term <= 1 + max_terms do (array_tmp2 : 0.0, term : 1 + term),
term
array(array_tmp3, 1 + 1 + max_terms), term : 1,
while term <= 1 + max_terms do (array_tmp3 : 0.0, term : 1 + term),
term
array(array_tmp4_a1, 1 + 1 + max_terms), term : 1,
while term <= 1 + max_terms do (array_tmp4_a1 : 0.0, term : 1 + term),
term
array(array_tmp4, 1 + 1 + max_terms), term : 1,
while term <= 1 + max_terms do (array_tmp4 : 0.0, term : 1 + term),
term
array(array_tmp5, 1 + 1 + max_terms), term : 1,
while term <= 1 + max_terms do (array_tmp5 : 0.0, term : 1 + term),
term
array(array_m1, 1 + 1 + max_terms), term : 1,
while term <= 1 + max_terms do (array_m1 : 0.0, term : 1 + term),
term
array(array_const_1, 1 + 1 + max_terms), term : 1,
while term <= 1 + max_terms do (array_const_1 : 0.0, term : 1 + term),
term
array_const_1 : 1, array(array_const_0D0, 1 + 1 + max_terms), term : 1,
1
while term <= 1 + max_terms do (array_const_0D0 : 0.0, term : 1 + term),
term
array_const_0D0 : 0.0, array(array_const_0D1, 1 + 1 + max_terms), term : 1,
1
while term <= 1 + max_terms do (array_const_0D1 : 0.0, term : 1 + term),
term
array_const_0D1 : 0.1, array(array_const_0D2, 1 + 1 + max_terms), term : 1,
1
while term <= 1 + max_terms do (array_const_0D2 : 0.0, term : 1 + term),
term
array_const_0D2 : 0.2, array(array_m1, 1 + 1 + max_terms), term : 1,
1
while term <= max_terms do (array_m1 : 0.0, term : 1 + term),
term
array_m1 : - 1.0, iiif : 0, while iiif <= glob_max_terms do (jjjf : 0,
1
while jjjf <= glob_max_terms do (array_fact_1 : 0,
iiif
array_fact_2 : 0, jjjf : 1 + jjjf), iiif : 1 + iiif), x_start : 0.0,
iiif, jjjf
x_end : 0.5, array_y_init : exact_soln_y(x_start),
1 + 0
glob_look_poles : true, glob_max_iter : 1000000, glob_display_interval : 0.1,
glob_max_minutes : 10, glob_desired_digits_correct : 10,
glob_display_interval : 0.01, glob_look_poles : true,
glob_max_iter : 10000000, glob_max_minutes : 3, glob_subiter_method : 3,
glob_last_good_h : glob_h, glob_max_terms : max_terms,
glob_max_sec : convfloat(3600.0) convfloat(glob_max_hours)
+ convfloat(60.0) convfloat(glob_max_minutes),
if glob_h > 0.0 then (glob_neg_h : false,
glob_display_interval : omniabs(glob_display_interval))
else (glob_neg_h : true, glob_display_interval :
- omniabs(glob_display_interval)), chk_data(), array_y_set_initial : true,
1, 1
array_y_set_initial : false, array_y_set_initial : false,
1, 2 1, 3
array_y_set_initial : false, array_y_set_initial : false,
1, 4 1, 5
array_y_set_initial : false, array_y_set_initial : false,
1, 6 1, 7
array_y_set_initial : false, array_y_set_initial : false,
1, 8 1, 9
array_y_set_initial : false, array_y_set_initial : false,
1, 10 1, 11
array_y_set_initial : false, array_y_set_initial : false,
1, 12 1, 13
array_y_set_initial : false, array_y_set_initial : false,
1, 14 1, 15
array_y_set_initial : false, array_y_set_initial : false,
1, 16 1, 17
array_y_set_initial : false, array_y_set_initial : false,
1, 18 1, 19
array_y_set_initial : false, array_y_set_initial : false,
1, 20 1, 21
array_y_set_initial : false, array_y_set_initial : false,
1, 22 1, 23
array_y_set_initial : false, array_y_set_initial : false,
1, 24 1, 25
array_y_set_initial : false, array_y_set_initial : false,
1, 26 1, 27
array_y_set_initial : false, array_y_set_initial : false,
1, 28 1, 29
array_y_set_initial : false, omniout_str(ALWAYS, "START of Optimize"),
1, 30
glob_check_sign : check_sign(x_start, x_end),
glob_h : check_sign(x_start, x_end), found_h : false, glob_h : glob_min_h,
if glob_max_h < glob_h then glob_h : glob_max_h,
if glob_display_interval < glob_h then glob_h : glob_display_interval,
best_h : glob_h, min_value : glob_large_float, est_answer : est_size_answer(),
opt_iter : 1, est_needed_step_err : estimated_needed_step_error(x_start,
x_end, glob_h, est_answer), omniout_float(ALWAYS, "est_needed_step_err", 32,
est_needed_step_err, 16, ""), estimated_step_error : 0.0,
while (opt_iter <= 100) and (not found_h) do (omniout_int(ALWAYS, "opt_iter",
32, opt_iter, 4, ""), array_x : x_start, array_x : glob_h,
1 2
glob_next_display : x_start, order_diff : 1, term_no : 1,
while term_no <= order_diff do (array_y :
term_no
array_y_init expt(glob_h, term_no - 1)
term_no
---------------------------------------------, term_no : 1 + term_no),
factorial_1(term_no - 1)
rows : order_diff, r_order : 1, while r_order <= rows do (term_no : 1,
while term_no <= 1 - r_order + rows do (it : - 1 + r_order + term_no,
array_y_init expt(glob_h, term_no - 1)
it
array_y_higher : ----------------------------------------,
r_order, term_no factorial_1(term_no - 1)
term_no : 1 + term_no), r_order : 1 + r_order), atomall(),
estimated_step_error : test_suggested_h(),
omniout_float(ALWAYS, "estimated_step_error", 32, estimated_step_error, 32,
""), if ((estimated_step_error > est_needed_step_err) and (opt_iter = 1))
or (glob_h >= glob_max_h) then (found_h : true, glob_h : glob_max_h,
best_h : glob_h) elseif (estimated_step_error > est_needed_step_err)
glob_h
and (not found_h) then (glob_h : ------, best_h : glob_h, found_h : true)
2.0
else (glob_h : glob_h 2.0, best_h : glob_h),
omniout_float(ALWAYS, "best_h", 32, best_h, 32, ""), opt_iter : 1 + opt_iter),
if (not found_h) and (opt_iter = 1) then (omniout_str(ALWAYS,
"Beginning glob_h too large."), found_h : false),
if opt_iter > 100 then (glob_h : glob_max_h, found_h : false),
if glob_display_interval < glob_h then glob_h : glob_display_interval,
if glob_html_log then html_log_file : openw("entry.html"),
if found_h then (omniout_str(ALWAYS, "START of Soultion"), array_x : x_start,
1
array_x : glob_h, glob_next_display : x_start, order_diff : 1, term_no : 1,
2
while term_no <= order_diff do (array_y :
term_no
array_y_init expt(glob_h, term_no - 1)
term_no
---------------------------------------------, term_no : 1 + term_no),
factorial_1(term_no - 1)
rows : order_diff, r_order : 1, while r_order <= rows do (term_no : 1,
while term_no <= 1 - r_order + rows do (it : - 1 + r_order + term_no,
array_y_init expt(glob_h, term_no - 1)
it
array_y_higher : ----------------------------------------,
r_order, term_no factorial_1(term_no - 1)
term_no : 1 + term_no), r_order : 1 + r_order), current_iter : 1,
glob_clock_start_sec : elapsed_time_seconds(),
glob_clock_sec : elapsed_time_seconds(), glob_current_iter : 0, glob_iter : 0,
omniout_str(DEBUGL, " "), glob_reached_optimal_h : true,
glob_optimal_clock_start_sec : elapsed_time_seconds(),
while (glob_current_iter < glob_max_iter)
and (glob_check_sign array_x < glob_check_sign x_end)
1
and (convfloat(glob_clock_sec) - convfloat(glob_orig_start_sec) < convfloat(glob_max_sec)) do (if reached_interval
() then (omniout_str(INFO, " "), omniout_str(INFO, "TOP MAIN SOLVE Loop")),
glob_iter : 1 + glob_iter, glob_clock_sec : elapsed_time_seconds(),
glob_current_iter : 1 + glob_current_iter, atomall(),
display_alot(current_iter), if glob_look_poles then check_for_pole(),
if reached_interval() then glob_next_display :
glob_display_interval + glob_next_display, array_x : glob_h + array_x ,
1 1
array_x : glob_h, order_diff : 2, ord : 2, calc_term : 1,
2
iii : glob_max_terms, while iii >= calc_term do (array_y_higher_work :
2, iii
array_y_higher
2, iii
---------------------------
expt(glob_h, calc_term - 1)
-------------------------------------, iii : iii - 1), temp_sum : 0.0,
factorial_3(iii - calc_term, iii - 1)
ord : 2, calc_term : 1, iii : glob_max_terms,
while iii >= calc_term do (temp_sum : array_y_higher_work + temp_sum,
ord, iii
iii : iii - 1), array_y_higher_work2 :
ord, calc_term
temp_sum expt(glob_h, calc_term - 1)
------------------------------------, ord : 1, calc_term : 2,
factorial_1(calc_term - 1)
iii : glob_max_terms, while iii >= calc_term do (array_y_higher_work :
1, iii
array_y_higher
1, iii
---------------------------
expt(glob_h, calc_term - 1)
-------------------------------------, iii : iii - 1), temp_sum : 0.0,
factorial_3(iii - calc_term, iii - 1)
ord : 1, calc_term : 2, iii : glob_max_terms,
while iii >= calc_term do (temp_sum : array_y_higher_work + temp_sum,
ord, iii
iii : iii - 1), array_y_higher_work2 :
ord, calc_term
temp_sum expt(glob_h, calc_term - 1)
------------------------------------, ord : 1, calc_term : 1,
factorial_1(calc_term - 1)
iii : glob_max_terms, while iii >= calc_term do (array_y_higher_work :
1, iii
array_y_higher
1, iii
---------------------------
expt(glob_h, calc_term - 1)
-------------------------------------, iii : iii - 1), temp_sum : 0.0,
factorial_3(iii - calc_term, iii - 1)
ord : 1, calc_term : 1, iii : glob_max_terms,
while iii >= calc_term do (temp_sum : array_y_higher_work + temp_sum,
ord, iii
iii : iii - 1), array_y_higher_work2 :
ord, calc_term
temp_sum expt(glob_h, calc_term - 1)
------------------------------------, term_no : glob_max_terms,
factorial_1(calc_term - 1)
while term_no >= 1 do (array_y : array_y_higher_work2 ,
term_no 1, term_no
ord : 1, while ord <= order_diff do (array_y_higher :
ord, term_no
array_y_higher_work2 , ord : 1 + ord), term_no : term_no - 1)),
ord, term_no
omniout_str(ALWAYS, "Finished!"), if glob_iter >= glob_max_iter
then omniout_str(ALWAYS,
"Maximum Iterations Reached before Solution Completed!"),
if elapsed_time_seconds() - convfloat(glob_orig_start_sec) >=
convfloat(glob_max_sec) then omniout_str(ALWAYS,
"Maximum Time Reached before Solution Completed!"),
glob_clock_sec : elapsed_time_seconds(),
omniout_str(INFO, "diff ( y , x , 1 ) = arcsin(sqrt(0.1 * x + 0.2));"),
omniout_int(INFO, "Iterations ", 32, glob_iter, 4, " "),
prog_report(x_start, x_end), if glob_html_log
then (logstart(html_log_file), logitem_str(html_log_file,
"2013-05-26T00:05:09-05:00"), logitem_str(html_log_file, "Maxima"),
logitem_str(html_log_file, "arcsin_sqrt"),
logitem_str(html_log_file,
"diff ( y , x , 1 ) = arcsin(sqrt(0.1 * x + 0.2));"),
logitem_float(html_log_file, x_start), logitem_float(html_log_file, x_end),
logitem_float(html_log_file, array_x ), logitem_float(html_log_file, glob_h),
1
logitem_str(html_log_file, "16"), logitem_good_digits(html_log_file,
array_last_rel_error ), logitem_integer(html_log_file, glob_max_terms),
1
logitem_float(html_log_file, array_1st_rel_error ),
1
logitem_float(html_log_file, array_last_rel_error ),
1
logitem_integer(html_log_file, glob_iter),
logitem_time(html_log_file, convfloat(glob_clock_sec)),
if glob_percent_done < 100.0 then (logitem_time(html_log_file,
convfloat(glob_total_exp_sec)), 0) else (logitem_str(html_log_file, "Done"),
0), log_revs(html_log_file, " 189 | "), logitem_str(html_log_file, "arcsin_sqrt diffeq.max"),
logitem_str(html_log_file,
"arcsin_sqrt maxima results"),
logitem_str(html_log_file, "All Tests - All Languages"),
logend(html_log_file)), if glob_html_log then close(html_log_file)))
(%o57) main() := block([d1, d2, d3, d4, est_err_2, niii, done_once, term, ord,
order_diff, term_no, html_log_file, iiif, jjjf, rows, r_order, sub_iter,
calc_term, iii, temp_sum, current_iter, x_start, x_end, it, max_terms,
opt_iter, tmp, subiter, est_needed_step_err, estimated_step_error, min_value,
est_answer, best_h, found_h, repeat_it],
define_variable(glob_max_terms, 30, fixnum),
define_variable(glob_iolevel, 5, fixnum),
define_variable(glob_yes_pole, 4, fixnum),
define_variable(glob_no_pole, 3, fixnum),
define_variable(glob_not_given, 0, fixnum),
define_variable(ALWAYS, 1, fixnum), define_variable(INFO, 2, fixnum),
define_variable(DEBUGL, 3, fixnum), define_variable(DEBUGMASSIVE, 4, fixnum),
define_variable(MAX_UNCHANGED, 10, fixnum),
define_variable(glob_check_sign, 1.0, float),
define_variable(glob_desired_digits_correct, 8.0, float),
define_variable(glob_max_estimated_step_error, 0.0, float),
define_variable(glob_ratio_of_radius, 0.1, float),
define_variable(glob_percent_done, 0.0, float),
define_variable(glob_subiter_method, 3, fixnum),
define_variable(glob_total_exp_sec, 0.1, float),
define_variable(glob_optimal_expect_sec, 0.1, float),
define_variable(glob_html_log, true, boolean),
define_variable(glob_good_digits, 0, fixnum),
define_variable(glob_max_opt_iter, 10, fixnum),
define_variable(glob_dump, false, boolean),
define_variable(glob_djd_debug, true, boolean),
define_variable(glob_display_flag, true, boolean),
define_variable(glob_djd_debug2, true, boolean),
define_variable(glob_sec_in_minute, 60, fixnum),
define_variable(glob_min_in_hour, 60, fixnum),
define_variable(glob_hours_in_day, 24, fixnum),
define_variable(glob_days_in_year, 365, fixnum),
define_variable(glob_sec_in_hour, 3600, fixnum),
define_variable(glob_sec_in_day, 86400, fixnum),
define_variable(glob_sec_in_year, 31536000, fixnum),
define_variable(glob_almost_1, 0.999, float),
define_variable(glob_clock_sec, 0.0, float),
define_variable(glob_clock_start_sec, 0.0, float),
define_variable(glob_not_yet_finished, true, boolean),
define_variable(glob_initial_pass, true, boolean),
define_variable(glob_not_yet_start_msg, true, boolean),
define_variable(glob_reached_optimal_h, false, boolean),
define_variable(glob_optimal_done, false, boolean),
define_variable(glob_disp_incr, 0.1, float),
define_variable(glob_h, 0.1, float), define_variable(glob_max_h, 0.1, float),
define_variable(glob_min_h, 1.0E-6, float),
define_variable(glob_type_given_pole, 0, fixnum),
define_variable(glob_large_float, 9.0E+100, float),
define_variable(glob_last_good_h, 0.1, float),
define_variable(glob_look_poles, false, boolean),
define_variable(glob_neg_h, false, boolean),
define_variable(glob_display_interval, 0.0, float),
define_variable(glob_next_display, 0.0, float),
define_variable(glob_dump_analytic, false, boolean),
define_variable(glob_abserr, 1.0E-11, float),
define_variable(glob_relerr, 1.0E-11, float),
define_variable(glob_max_hours, 0.0, float),
define_variable(glob_max_iter, 1000, fixnum),
define_variable(glob_max_rel_trunc_err, 1.0E-11, float),
define_variable(glob_max_trunc_err, 1.0E-11, float),
define_variable(glob_no_eqs, 0, fixnum),
define_variable(glob_optimal_clock_start_sec, 0.0, float),
define_variable(glob_optimal_start, 0.0, float),
define_variable(glob_small_float, 0.0, float),
define_variable(glob_smallish_float, 0.0, float),
define_variable(glob_unchanged_h_cnt, 0, fixnum),
define_variable(glob_warned, false, boolean),
define_variable(glob_warned2, false, boolean),
define_variable(glob_max_sec, 10000.0, float),
define_variable(glob_orig_start_sec, 0.0, float),
define_variable(glob_start, 0, fixnum),
define_variable(glob_curr_iter_when_opt, 0, fixnum),
define_variable(glob_current_iter, 0, fixnum),
define_variable(glob_iter, 0, fixnum),
define_variable(glob_normmax, 0.0, float),
define_variable(glob_max_minutes, 0.0, float), ALWAYS : 1, INFO : 2,
DEBUGL : 3, DEBUGMASSIVE : 4, glob_iolevel : INFO,
glob_orig_start_sec : elapsed_time_seconds(), MAX_UNCHANGED : 10,
glob_curr_iter_when_opt : 0, glob_display_flag : true, glob_no_eqs : 1,
glob_iter : - 1, opt_iter : - 1, glob_max_iter : 50000, glob_max_hours : 0.0,
glob_max_minutes : 15.0, omniout_str(ALWAYS,
"##############ECHO OF PROBLEM#################"), omniout_str(ALWAYS, "######\
########temp/arcsin_sqrtpostode.ode#################"),
omniout_str(ALWAYS, "diff ( y , x , 1 ) = arcsin(sqrt(0.1 * x + 0.2));"),
omniout_str(ALWAYS, "!"), omniout_str(ALWAYS,
"/* BEGIN FIRST INPUT BLOCK */"), omniout_str(ALWAYS, "Digits:32,"),
omniout_str(ALWAYS, "max_terms:30,"), omniout_str(ALWAYS, "!"),
omniout_str(ALWAYS, "/* END FIRST INPUT BLOCK */"),
omniout_str(ALWAYS, "/* BEGIN SECOND INPUT BLOCK */"),
omniout_str(ALWAYS, "x_start:0.0,"), omniout_str(ALWAYS, "x_end:0.5,"),
omniout_str(ALWAYS, "array_y_init[0 + 1] : exact_soln_y(x_start),"),
omniout_str(ALWAYS, "glob_look_poles:true,"),
omniout_str(ALWAYS, "glob_max_iter:1000000,"),
omniout_str(ALWAYS, "glob_display_interval:0.1,"),
omniout_str(ALWAYS, "glob_max_minutes:10,"),
omniout_str(ALWAYS, "/* END SECOND INPUT BLOCK */"),
omniout_str(ALWAYS, "/* BEGIN OVERRIDE BLOCK */"),
omniout_str(ALWAYS, "glob_desired_digits_correct:10,"),
omniout_str(ALWAYS, "glob_display_interval:0.01,"),
omniout_str(ALWAYS, "glob_look_poles:true,"),
omniout_str(ALWAYS, "glob_max_iter:10000000,"),
omniout_str(ALWAYS, "glob_max_minutes:3,"),
omniout_str(ALWAYS, "glob_subiter_method:3,"),
omniout_str(ALWAYS, "/* END OVERRIDE BLOCK */"), omniout_str(ALWAYS, "!"),
omniout_str(ALWAYS, "/* BEGIN USER DEF BLOCK */"),
omniout_str(ALWAYS, "exact_soln_y (x) := (block("), omniout_str(ALWAYS, " (10.\
0 * (0.1 * x + 0.2) * arcsin(sqrt ( 0.1 * x + 0.2)) + 5.0 * sqrt( 0.1 * x +"),
omniout_str(ALWAYS,
"0.2) * sqrt( 0.8 - 0.1 * x) - 5.0 * arcsin(sqrt( 0.1 * x + 0.2))) "),
omniout_str(ALWAYS, "));"), omniout_str(ALWAYS, "/* END USER DEF BLOCK */"),
omniout_str(ALWAYS, "#######END OF ECHO OF PROBLEM#################"),
glob_unchanged_h_cnt : 0, glob_warned : false, glob_warned2 : false,
glob_small_float : 0.0, glob_smallish_float : 0.0,
glob_large_float : 1.0E+100, glob_almost_1 : 0.99, Digits : 32,
max_terms : 30, glob_max_terms : max_terms, glob_html_log : true,
array(array_y_init, 1 + max_terms), array(array_norms, 1 + max_terms),
array(array_fact_1, 1 + max_terms), array(array_pole, 1 + 4),
array(array_real_pole, 1 + 4), array(array_complex_pole, 1 + 4),
array(array_1st_rel_error, 1 + 2), array(array_last_rel_error, 1 + 2),
array(array_type_pole, 1 + 2), array(array_type_real_pole, 1 + 2),
array(array_type_complex_pole, 1 + 2), array(array_y, 1 + max_terms),
array(array_x, 1 + max_terms), array(array_tmp0, 1 + max_terms),
array(array_tmp1, 1 + max_terms), array(array_tmp2, 1 + max_terms),
array(array_tmp3, 1 + max_terms), array(array_tmp4_a1, 1 + max_terms),
array(array_tmp4, 1 + max_terms), array(array_tmp5, 1 + max_terms),
array(array_m1, 1 + max_terms), array(array_y_higher, 1 + 2, 1 + max_terms),
array(array_y_higher_work, 1 + 2, 1 + max_terms),
array(array_y_higher_work2, 1 + 2, 1 + max_terms),
array(array_y_set_initial, 1 + 2, 1 + max_terms),
array(array_poles, 1 + 2, 1 + 3), array(array_given_rad_poles, 1 + 2, 1 + 3),
array(array_given_ord_poles, 1 + 2, 1 + 3),
array(array_real_poles, 1 + 2, 1 + 3),
array(array_complex_poles, 1 + 2, 1 + 3),
array(array_fact_2, 1 + max_terms, 1 + max_terms), term : 1,
while term <= max_terms do (array_y_init : 0.0, term : 1 + term),
term
term : 1, while term <= max_terms do (array_norms : 0.0,
term
term : 1 + term), term : 1, while term <=
max_terms do (array_fact_1 : 0.0, term : 1 + term), term : 1,
term
while term <= 4 do (array_pole : 0.0, term : 1 + term), term : 1,
term
while term <= 4 do (array_real_pole : 0.0, term : 1 + term), term : 1,
term
while term <= 4 do (array_complex_pole : 0.0, term : 1 + term), term : 1,
term
while term <= 2 do (array_1st_rel_error : 0.0, term : 1 + term),
term
term : 1, while term <= 2 do (array_last_rel_error : 0.0,
term
term : 1 + term), term : 1, while term <= 2 do (array_type_pole : 0.0,
term
term : 1 + term), term : 1, while term <=
2 do (array_type_real_pole : 0.0, term : 1 + term), term : 1,
term
while term <= 2 do (array_type_complex_pole : 0.0, term : 1 + term),
term
term : 1, while term <= max_terms do (array_y : 0.0, term : 1 + term),
term
term : 1, while term <= max_terms do (array_x : 0.0, term : 1 + term),
term
term : 1, while term <= max_terms do (array_tmp0 : 0.0, term : 1 + term),
term
term : 1, while term <= max_terms do (array_tmp1 : 0.0, term : 1 + term),
term
term : 1, while term <= max_terms do (array_tmp2 : 0.0, term : 1 + term),
term
term : 1, while term <= max_terms do (array_tmp3 : 0.0, term : 1 + term),
term
term : 1, while term <= max_terms do (array_tmp4_a1 : 0.0,
term
term : 1 + term), term : 1, while term <= max_terms do (array_tmp4 : 0.0,
term
term : 1 + term), term : 1, while term <= max_terms do (array_tmp5 : 0.0,
term
term : 1 + term), term : 1, while term <= max_terms do (array_m1 : 0.0,
term
term : 1 + term), ord : 1, while ord <= 2 do (term : 1,
while term <= max_terms do (array_y_higher : 0.0, term : 1 + term),
ord, term
ord : 1 + ord), ord : 1, while ord <= 2 do (term : 1,
while term <= max_terms do (array_y_higher_work : 0.0,
ord, term
term : 1 + term), ord : 1 + ord), ord : 1,
while ord <= 2 do (term : 1, while term <=
max_terms do (array_y_higher_work2 : 0.0, term : 1 + term),
ord, term
ord : 1 + ord), ord : 1, while ord <= 2 do (term : 1,
while term <= max_terms do (array_y_set_initial : 0.0,
ord, term
term : 1 + term), ord : 1 + ord), ord : 1,
while ord <= 2 do (term : 1, while term <= 3 do (array_poles : 0.0,
ord, term
term : 1 + term), ord : 1 + ord), ord : 1,
while ord <= 2 do (term : 1, while term <=
3 do (array_given_rad_poles : 0.0, term : 1 + term), ord : 1 + ord),
ord, term
ord : 1, while ord <= 2 do (term : 1,
while term <= 3 do (array_given_ord_poles : 0.0, term : 1 + term),
ord, term
ord : 1 + ord), ord : 1, while ord <= 2 do (term : 1,
while term <= 3 do (array_real_poles : 0.0, term : 1 + term),
ord, term
ord : 1 + ord), ord : 1, while ord <= 2 do (term : 1,
while term <= 3 do (array_complex_poles : 0.0, term : 1 + term),
ord, term
ord : 1 + ord), ord : 1, while ord <= max_terms do (term : 1,
while term <= max_terms do (array_fact_2 : 0.0, term : 1 + term),
ord, term
ord : 1 + ord), array(array_y, 1 + 1 + max_terms), term : 1,
while term <= 1 + max_terms do (array_y : 0.0, term : 1 + term),
term
array(array_x, 1 + 1 + max_terms), term : 1,
while term <= 1 + max_terms do (array_x : 0.0, term : 1 + term),
term
array(array_tmp0, 1 + 1 + max_terms), term : 1,
while term <= 1 + max_terms do (array_tmp0 : 0.0, term : 1 + term),
term
array(array_tmp1, 1 + 1 + max_terms), term : 1,
while term <= 1 + max_terms do (array_tmp1 : 0.0, term : 1 + term),
term
array(array_tmp2, 1 + 1 + max_terms), term : 1,
while term <= 1 + max_terms do (array_tmp2 : 0.0, term : 1 + term),
term
array(array_tmp3, 1 + 1 + max_terms), term : 1,
while term <= 1 + max_terms do (array_tmp3 : 0.0, term : 1 + term),
term
array(array_tmp4_a1, 1 + 1 + max_terms), term : 1,
while term <= 1 + max_terms do (array_tmp4_a1 : 0.0, term : 1 + term),
term
array(array_tmp4, 1 + 1 + max_terms), term : 1,
while term <= 1 + max_terms do (array_tmp4 : 0.0, term : 1 + term),
term
array(array_tmp5, 1 + 1 + max_terms), term : 1,
while term <= 1 + max_terms do (array_tmp5 : 0.0, term : 1 + term),
term
array(array_m1, 1 + 1 + max_terms), term : 1,
while term <= 1 + max_terms do (array_m1 : 0.0, term : 1 + term),
term
array(array_const_1, 1 + 1 + max_terms), term : 1,
while term <= 1 + max_terms do (array_const_1 : 0.0, term : 1 + term),
term
array_const_1 : 1, array(array_const_0D0, 1 + 1 + max_terms), term : 1,
1
while term <= 1 + max_terms do (array_const_0D0 : 0.0, term : 1 + term),
term
array_const_0D0 : 0.0, array(array_const_0D1, 1 + 1 + max_terms), term : 1,
1
while term <= 1 + max_terms do (array_const_0D1 : 0.0, term : 1 + term),
term
array_const_0D1 : 0.1, array(array_const_0D2, 1 + 1 + max_terms), term : 1,
1
while term <= 1 + max_terms do (array_const_0D2 : 0.0, term : 1 + term),
term
array_const_0D2 : 0.2, array(array_m1, 1 + 1 + max_terms), term : 1,
1
while term <= max_terms do (array_m1 : 0.0, term : 1 + term),
term
array_m1 : - 1.0, iiif : 0, while iiif <= glob_max_terms do (jjjf : 0,
1
while jjjf <= glob_max_terms do (array_fact_1 : 0,
iiif
array_fact_2 : 0, jjjf : 1 + jjjf), iiif : 1 + iiif), x_start : 0.0,
iiif, jjjf
x_end : 0.5, array_y_init : exact_soln_y(x_start),
1 + 0
glob_look_poles : true, glob_max_iter : 1000000, glob_display_interval : 0.1,
glob_max_minutes : 10, glob_desired_digits_correct : 10,
glob_display_interval : 0.01, glob_look_poles : true,
glob_max_iter : 10000000, glob_max_minutes : 3, glob_subiter_method : 3,
glob_last_good_h : glob_h, glob_max_terms : max_terms,
glob_max_sec : convfloat(3600.0) convfloat(glob_max_hours)
+ convfloat(60.0) convfloat(glob_max_minutes),
if glob_h > 0.0 then (glob_neg_h : false,
glob_display_interval : omniabs(glob_display_interval))
else (glob_neg_h : true, glob_display_interval :
- omniabs(glob_display_interval)), chk_data(), array_y_set_initial : true,
1, 1
array_y_set_initial : false, array_y_set_initial : false,
1, 2 1, 3
array_y_set_initial : false, array_y_set_initial : false,
1, 4 1, 5
array_y_set_initial : false, array_y_set_initial : false,
1, 6 1, 7
array_y_set_initial : false, array_y_set_initial : false,
1, 8 1, 9
array_y_set_initial : false, array_y_set_initial : false,
1, 10 1, 11
array_y_set_initial : false, array_y_set_initial : false,
1, 12 1, 13
array_y_set_initial : false, array_y_set_initial : false,
1, 14 1, 15
array_y_set_initial : false, array_y_set_initial : false,
1, 16 1, 17
array_y_set_initial : false, array_y_set_initial : false,
1, 18 1, 19
array_y_set_initial : false, array_y_set_initial : false,
1, 20 1, 21
array_y_set_initial : false, array_y_set_initial : false,
1, 22 1, 23
array_y_set_initial : false, array_y_set_initial : false,
1, 24 1, 25
array_y_set_initial : false, array_y_set_initial : false,
1, 26 1, 27
array_y_set_initial : false, array_y_set_initial : false,
1, 28 1, 29
array_y_set_initial : false, omniout_str(ALWAYS, "START of Optimize"),
1, 30
glob_check_sign : check_sign(x_start, x_end),
glob_h : check_sign(x_start, x_end), found_h : false, glob_h : glob_min_h,
if glob_max_h < glob_h then glob_h : glob_max_h,
if glob_display_interval < glob_h then glob_h : glob_display_interval,
best_h : glob_h, min_value : glob_large_float, est_answer : est_size_answer(),
opt_iter : 1, est_needed_step_err : estimated_needed_step_error(x_start,
x_end, glob_h, est_answer), omniout_float(ALWAYS, "est_needed_step_err", 32,
est_needed_step_err, 16, ""), estimated_step_error : 0.0,
while (opt_iter <= 100) and (not found_h) do (omniout_int(ALWAYS, "opt_iter",
32, opt_iter, 4, ""), array_x : x_start, array_x : glob_h,
1 2
glob_next_display : x_start, order_diff : 1, term_no : 1,
while term_no <= order_diff do (array_y :
term_no
array_y_init expt(glob_h, term_no - 1)
term_no
---------------------------------------------, term_no : 1 + term_no),
factorial_1(term_no - 1)
rows : order_diff, r_order : 1, while r_order <= rows do (term_no : 1,
while term_no <= 1 - r_order + rows do (it : - 1 + r_order + term_no,
array_y_init expt(glob_h, term_no - 1)
it
array_y_higher : ----------------------------------------,
r_order, term_no factorial_1(term_no - 1)
term_no : 1 + term_no), r_order : 1 + r_order), atomall(),
estimated_step_error : test_suggested_h(),
omniout_float(ALWAYS, "estimated_step_error", 32, estimated_step_error, 32,
""), if ((estimated_step_error > est_needed_step_err) and (opt_iter = 1))
or (glob_h >= glob_max_h) then (found_h : true, glob_h : glob_max_h,
best_h : glob_h) elseif (estimated_step_error > est_needed_step_err)
glob_h
and (not found_h) then (glob_h : ------, best_h : glob_h, found_h : true)
2.0
else (glob_h : glob_h 2.0, best_h : glob_h),
omniout_float(ALWAYS, "best_h", 32, best_h, 32, ""), opt_iter : 1 + opt_iter),
if (not found_h) and (opt_iter = 1) then (omniout_str(ALWAYS,
"Beginning glob_h too large."), found_h : false),
if opt_iter > 100 then (glob_h : glob_max_h, found_h : false),
if glob_display_interval < glob_h then glob_h : glob_display_interval,
if glob_html_log then html_log_file : openw("entry.html"),
if found_h then (omniout_str(ALWAYS, "START of Soultion"), array_x : x_start,
1
array_x : glob_h, glob_next_display : x_start, order_diff : 1, term_no : 1,
2
while term_no <= order_diff do (array_y :
term_no
array_y_init expt(glob_h, term_no - 1)
term_no
---------------------------------------------, term_no : 1 + term_no),
factorial_1(term_no - 1)
rows : order_diff, r_order : 1, while r_order <= rows do (term_no : 1,
while term_no <= 1 - r_order + rows do (it : - 1 + r_order + term_no,
array_y_init expt(glob_h, term_no - 1)
it
array_y_higher : ----------------------------------------,
r_order, term_no factorial_1(term_no - 1)
term_no : 1 + term_no), r_order : 1 + r_order), current_iter : 1,
glob_clock_start_sec : elapsed_time_seconds(),
glob_clock_sec : elapsed_time_seconds(), glob_current_iter : 0, glob_iter : 0,
omniout_str(DEBUGL, " "), glob_reached_optimal_h : true,
glob_optimal_clock_start_sec : elapsed_time_seconds(),
while (glob_current_iter < glob_max_iter)
and (glob_check_sign array_x < glob_check_sign x_end)
1
and (convfloat(glob_clock_sec) - convfloat(glob_orig_start_sec) < convfloat(glob_max_sec)) do (if reached_interval
() then (omniout_str(INFO, " "), omniout_str(INFO, "TOP MAIN SOLVE Loop")),
glob_iter : 1 + glob_iter, glob_clock_sec : elapsed_time_seconds(),
glob_current_iter : 1 + glob_current_iter, atomall(),
display_alot(current_iter), if glob_look_poles then check_for_pole(),
if reached_interval() then glob_next_display :
glob_display_interval + glob_next_display, array_x : glob_h + array_x ,
1 1
array_x : glob_h, order_diff : 2, ord : 2, calc_term : 1,
2
iii : glob_max_terms, while iii >= calc_term do (array_y_higher_work :
2, iii
array_y_higher
2, iii
---------------------------
expt(glob_h, calc_term - 1)
-------------------------------------, iii : iii - 1), temp_sum : 0.0,
factorial_3(iii - calc_term, iii - 1)
ord : 2, calc_term : 1, iii : glob_max_terms,
while iii >= calc_term do (temp_sum : array_y_higher_work + temp_sum,
ord, iii
iii : iii - 1), array_y_higher_work2 :
ord, calc_term
temp_sum expt(glob_h, calc_term - 1)
------------------------------------, ord : 1, calc_term : 2,
factorial_1(calc_term - 1)
iii : glob_max_terms, while iii >= calc_term do (array_y_higher_work :
1, iii
array_y_higher
1, iii
---------------------------
expt(glob_h, calc_term - 1)
-------------------------------------, iii : iii - 1), temp_sum : 0.0,
factorial_3(iii - calc_term, iii - 1)
ord : 1, calc_term : 2, iii : glob_max_terms,
while iii >= calc_term do (temp_sum : array_y_higher_work + temp_sum,
ord, iii
iii : iii - 1), array_y_higher_work2 :
ord, calc_term
temp_sum expt(glob_h, calc_term - 1)
------------------------------------, ord : 1, calc_term : 1,
factorial_1(calc_term - 1)
iii : glob_max_terms, while iii >= calc_term do (array_y_higher_work :
1, iii
array_y_higher
1, iii
---------------------------
expt(glob_h, calc_term - 1)
-------------------------------------, iii : iii - 1), temp_sum : 0.0,
factorial_3(iii - calc_term, iii - 1)
ord : 1, calc_term : 1, iii : glob_max_terms,
while iii >= calc_term do (temp_sum : array_y_higher_work + temp_sum,
ord, iii
iii : iii - 1), array_y_higher_work2 :
ord, calc_term
temp_sum expt(glob_h, calc_term - 1)
------------------------------------, term_no : glob_max_terms,
factorial_1(calc_term - 1)
while term_no >= 1 do (array_y : array_y_higher_work2 ,
term_no 1, term_no
ord : 1, while ord <= order_diff do (array_y_higher :
ord, term_no
array_y_higher_work2 , ord : 1 + ord), term_no : term_no - 1)),
ord, term_no
omniout_str(ALWAYS, "Finished!"), if glob_iter >= glob_max_iter
then omniout_str(ALWAYS,
"Maximum Iterations Reached before Solution Completed!"),
if elapsed_time_seconds() - convfloat(glob_orig_start_sec) >=
convfloat(glob_max_sec) then omniout_str(ALWAYS,
"Maximum Time Reached before Solution Completed!"),
glob_clock_sec : elapsed_time_seconds(),
omniout_str(INFO, "diff ( y , x , 1 ) = arcsin(sqrt(0.1 * x + 0.2));"),
omniout_int(INFO, "Iterations ", 32, glob_iter, 4, " "),
prog_report(x_start, x_end), if glob_html_log
then (logstart(html_log_file), logitem_str(html_log_file,
"2013-05-26T00:05:09-05:00"), logitem_str(html_log_file, "Maxima"),
logitem_str(html_log_file, "arcsin_sqrt"),
logitem_str(html_log_file,
"diff ( y , x , 1 ) = arcsin(sqrt(0.1 * x + 0.2));"),
logitem_float(html_log_file, x_start), logitem_float(html_log_file, x_end),
logitem_float(html_log_file, array_x ), logitem_float(html_log_file, glob_h),
1
logitem_str(html_log_file, "16"), logitem_good_digits(html_log_file,
array_last_rel_error ), logitem_integer(html_log_file, glob_max_terms),
1
logitem_float(html_log_file, array_1st_rel_error ),
1
logitem_float(html_log_file, array_last_rel_error ),
1
logitem_integer(html_log_file, glob_iter),
logitem_time(html_log_file, convfloat(glob_clock_sec)),
if glob_percent_done < 100.0 then (logitem_time(html_log_file,
convfloat(glob_total_exp_sec)), 0) else (logitem_str(html_log_file, "Done"),
0), log_revs(html_log_file, " 189 | "), logitem_str(html_log_file, "arcsin_sqrt diffeq.max"),
logitem_str(html_log_file,
"arcsin_sqrt maxima results"),
logitem_str(html_log_file, "All Tests - All Languages"),
logend(html_log_file)), if glob_html_log then close(html_log_file)))
(%i58) main()
"##############ECHO OF PROBLEM#################"
"##############temp/arcsin_sqrtpostode.ode#################"
"diff ( y , x , 1 ) = arcsin(sqrt(0.1 * x + 0.2));"
"!"
"/* BEGIN FIRST INPUT BLOCK */"
"Digits:32,"
"max_terms:30,"
"!"
"/* END FIRST INPUT BLOCK */"
"/* BEGIN SECOND INPUT BLOCK */"
"x_start:0.0,"
"x_end:0.5,"
"array_y_init[0 + 1] : exact_soln_y(x_start),"
"glob_look_poles:true,"
"glob_max_iter:1000000,"
"glob_display_interval:0.1,"
"glob_max_minutes:10,"
"/* END SECOND INPUT BLOCK */"
"/* BEGIN OVERRIDE BLOCK */"
"glob_desired_digits_correct:10,"
"glob_display_interval:0.01,"
"glob_look_poles:true,"
"glob_max_iter:10000000,"
"glob_max_minutes:3,"
"glob_subiter_method:3,"
"/* END OVERRIDE BLOCK */"
"!"
"/* BEGIN USER DEF BLOCK */"
"exact_soln_y (x) := (block("
" (10.0 * (0.1 * x + 0.2) * arcsin(sqrt ( 0.1 * x + 0.2)) + 5.0 * sqrt( 0.1 * x +"
"0.2) * sqrt( 0.8 - 0.1 * x) - 5.0 * arcsin(sqrt( 0.1 * x + 0.2))) "
"));"
"/* END USER DEF BLOCK */"
"#######END OF ECHO OF PROBLEM#################"
"START of Optimize"
min_size = 0.0 ""
min_size = 1. ""
glob_desired_digits_correct = 10. ""
desired_abs_gbl_error = 1.0000000000E-10 ""
range = 0.5 ""
estimated_steps = 500000. ""
step_error = 1.9999999999999998E-16 ""
est_needed_step_err = 1.9999999999999998E-16 ""
opt_iter = 1
hn_div_ho = 0.5 ""
hn_div_ho_2 = 0.25 ""
hn_div_ho_3 = 0.125 ""
max_estimated_step_error = 1.1720965339945287000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000E-168 ""
estimated_step_error = 1.1720965339945287000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000E-168 ""
best_h = 2.000000E-6 ""
opt_iter = 2
hn_div_ho = 0.5 ""
hn_div_ho_2 = 0.25 ""
hn_div_ho_3 = 0.125 ""
max_estimated_step_error = 7.86580490494675300000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000E-161 ""
estimated_step_error = 7.86580490494675300000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000E-161 ""
best_h = 4.000000E-6 ""
opt_iter = 3
hn_div_ho = 0.5 ""
hn_div_ho_2 = 0.25 ""
hn_div_ho_3 = 0.125 ""
max_estimated_step_error = 5.278649921019752000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000E-153 ""
estimated_step_error = 5.278649921019752000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000E-153 ""
best_h = 8.000000E-6 ""
opt_iter = 4
hn_div_ho = 0.5 ""
hn_div_ho_2 = 0.25 ""
hn_div_ho_3 = 0.125 ""
max_estimated_step_error = 3.5424387818267090000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000E-145 ""
estimated_step_error = 3.5424387818267090000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000E-145 ""
best_h = 1.600000E-5 ""
opt_iter = 5
hn_div_ho = 0.5 ""
hn_div_ho_2 = 0.25 ""
hn_div_ho_3 = 0.125 ""
max_estimated_step_error = 2.377286109685045600000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000E-137 ""
estimated_step_error = 2.377286109685045600000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000E-137 ""
best_h = 3.200000E-5 ""
opt_iter = 6
hn_div_ho = 0.5 ""
hn_div_ho_2 = 0.25 ""
hn_div_ho_3 = 0.125 ""
max_estimated_step_error = 1.5953639111864196000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000E-129 ""
estimated_step_error = 1.5953639111864196000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000E-129 ""
best_h = 6.400000E-5 ""
opt_iter = 7
hn_div_ho = 0.5 ""
hn_div_ho_2 = 0.25 ""
hn_div_ho_3 = 0.125 ""
max_estimated_step_error = 1.07062282492835090000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000E-121 ""
estimated_step_error = 1.07062282492835090000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000E-121 ""
best_h = 1.280000E-4 ""
opt_iter = 8
hn_div_ho = 0.5 ""
hn_div_ho_2 = 0.25 ""
hn_div_ho_3 = 0.125 ""
max_estimated_step_error = 7.184723836425153000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000E-114 ""
estimated_step_error = 7.184723836425153000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000E-114 ""
best_h = 2.560000E-4 ""
opt_iter = 9
hn_div_ho = 0.5 ""
hn_div_ho_2 = 0.25 ""
hn_div_ho_3 = 0.125 ""
max_estimated_step_error = 4.8214465398044580000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000E-106 ""
estimated_step_error = 4.8214465398044580000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000E-106 ""
best_h = 5.120000E-4 ""
opt_iter = 10
hn_div_ho = 0.5 ""
hn_div_ho_2 = 0.25 ""
hn_div_ho_3 = 0.125 ""
max_estimated_step_error = 3.23543010162535450000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000E-98 ""
estimated_step_error = 3.23543010162535450000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000E-98 ""
best_h = 1.024000E-3 ""
opt_iter = 11
hn_div_ho = 0.5 ""
hn_div_ho_2 = 0.25 ""
hn_div_ho_3 = 0.125 ""
max_estimated_step_error = 2.1710082362436436000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000E-90 ""
estimated_step_error = 2.1710082362436436000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000E-90 ""
best_h = 2.048000E-3 ""
opt_iter = 12
hn_div_ho = 0.5 ""
hn_div_ho_2 = 0.25 ""
hn_div_ho_3 = 0.125 ""
max_estimated_step_error = 1.45660065246074330000000000000000000000000000000000000000000000000000000000000000000000000000000000E-82 ""
estimated_step_error = 1.45660065246074330000000000000000000000000000000000000000000000000000000000000000000000000000000000E-82 ""
best_h = 4.096000E-3 ""
opt_iter = 13
hn_div_ho = 0.5 ""
hn_div_ho_2 = 0.25 ""
hn_div_ho_3 = 0.125 ""
max_estimated_step_error = 9.770543937362862000000000000000000000000000000000000000000000000000000000000000000000000000E-75 ""
estimated_step_error = 9.770543937362862000000000000000000000000000000000000000000000000000000000000000000000000000E-75 ""
best_h = 8.192000E-3 ""
opt_iter = 14
hn_div_ho = 0.5 ""
hn_div_ho_2 = 0.25 ""
hn_div_ho_3 = 0.125 ""
max_estimated_step_error = 6.5508193496172260000000000000000000000000000000000000000000000000000000000000000000E-67 ""
estimated_step_error = 6.5508193496172260000000000000000000000000000000000000000000000000000000000000000000E-67 ""
best_h = 1.638400E-2 ""
opt_iter = 15
hn_div_ho = 0.5 ""
hn_div_ho_2 = 0.25 ""
hn_div_ho_3 = 0.125 ""
max_estimated_step_error = 4.388040640368086600000000000000000000000000000000000000000000000000000000000E-59 ""
estimated_step_error = 4.388040640368086600000000000000000000000000000000000000000000000000000000000E-59 ""
best_h = 3.276800E-2 ""
opt_iter = 16
hn_div_ho = 0.5 ""
hn_div_ho_2 = 0.25 ""
hn_div_ho_3 = 0.125 ""
max_estimated_step_error = 2.933900639709122000000000000000000000000000000000000000000000000000E-51 ""
estimated_step_error = 2.933900639709122000000000000000000000000000000000000000000000000000E-51 ""
best_h = 6.553600E-2 ""
opt_iter = 17
hn_div_ho = 0.5 ""
hn_div_ho_2 = 0.25 ""
hn_div_ho_3 = 0.125 ""
max_estimated_step_error = 1.95449156416179960000000000000000000000000000000000000000000E-43 ""
estimated_step_error = 1.95449156416179960000000000000000000000000000000000000000000E-43 ""
best_h = 0.131072 ""
opt_iter = 18
hn_div_ho = 0.5 ""
hn_div_ho_2 = 0.25 ""
hn_div_ho_3 = 0.125 ""
max_estimated_step_error = 1.292731496281797600000000000000000000000000000000000E-35 ""
estimated_step_error = 1.292731496281797600000000000000000000000000000000000E-35 ""
best_h = 0.1 ""
"START of Soultion"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.0 " "
y[1] (analytic) = 0.609057172997582 " "
y[1] (numeric) = 0.609057172997582 " "
absolute error = 0.0 " "
relative error = 0.0 "%"
Correct digits = 16
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.243627707756313 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 1.00E-2 " "
y[1] (analytic) = 0.613699895190067 " "
y[1] (numeric) = 0.6136998951900672 " "
absolute error = 2.2204460492503130000000000000000E-16 " "
relative error = 3.61813007734444200000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.2548444947098796 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 2.00E-2 " "
y[1] (analytic) = 0.6183550940668945 " "
y[1] (numeric) = 0.6183550940668949 " "
absolute error = 4.4408920985006260000000000000000E-16 " "
relative error = 7.18178299347883100000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.2660612684944903 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 3.00E-2 " "
y[1] (analytic) = 0.6230227465023468 " "
y[1] (numeric) = 0.6230227465023473 " "
absolute error = 5.5511151231257830000000000000000E-16 " "
relative error = 8.90997183375691200000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.2772780291141683 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 4.00E-2 " "
y[1] (analytic) = 0.6277028295756555 " "
y[1] (numeric) = 0.6277028295756554 " "
absolute error = 1.11022302462515650000000000000000E-16 " "
relative error = 1.768708013273889400000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.288494776572927 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 5.00E-2 " "
y[1] (analytic) = 0.6323953205685546 " "
y[1] (numeric) = 0.6323953205685546 " "
absolute error = 0.0 " "
relative error = 0.0 "%"
Correct digits = 16
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.299711510874779 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 6.000000000000001000E-2 " "
y[1] (analytic) = 0.6371001969628822 " "
y[1] (numeric) = 0.6371001969628832 " "
absolute error = 9.9920072216264090000000000000000E-16 " "
relative error = 1.5683572645651760000000000000E-13 "%"
Correct digits = 16
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.3109282320237368 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 7.00E-2 " "
y[1] (analytic) = 0.6418174364382221 " "
y[1] (numeric) = 0.6418174364382218 " "
absolute error = 3.33066907387546960000000000000000E-16 " "
relative error = 5.18943376228461500000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.322144940023807 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 8.00E-2 " "
y[1] (analytic) = 0.6465470168695724 " "
y[1] (numeric) = 0.6465470168695729 " "
absolute error = 5.5511151231257830000000000000000E-16 " "
relative error = 8.58578723323629000000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.333361634879001 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 9.00E-2 " "
y[1] (analytic) = 0.6512889163250812 " "
y[1] (numeric) = 0.6512889163250819 " "
absolute error = 6.6613381477509390000000000000000E-16 " "
relative error = 1.02279310775588730000000000000E-13 "%"
Correct digits = 16
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.3445783165933207 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 9.99999999999999900E-2 " "
y[1] (analytic) = 0.6560431130637943 " "
y[1] (numeric) = 0.6560431130637946 " "
absolute error = 3.33066907387546960000000000000000E-16 " "
relative error = 5.07690578187899100000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.3557949851707742 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.10999999999999999 " "
y[1] (analytic) = 0.6608095855334541 " "
y[1] (numeric) = 0.6608095855334547 " "
absolute error = 5.5511151231257830000000000000000E-16 " "
relative error = 8.4004760897112500000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.3670116406153574 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.11999999999999998 " "
y[1] (analytic) = 0.6655883123683366 " "
y[1] (numeric) = 0.6655883123683373 " "
absolute error = 6.6613381477509390000000000000000E-16 " "
relative error = 1.00081957930543630000000000000E-13 "%"
Correct digits = 16
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.378228282931078 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.12999999999999998 " "
y[1] (analytic) = 0.6703792723871187 " "
y[1] (numeric) = 0.6703792723871194 " "
absolute error = 6.6613381477509390000000000000000E-16 " "
relative error = 9.93667081028762600000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.389444912121931 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.13999999999999999 " "
y[1] (analytic) = 0.675182444590785 " "
y[1] (numeric) = 0.6751824445907855 " "
absolute error = 4.4408920985006260000000000000000E-16 " "
relative error = 6.5773216322177410000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.4006615281919172 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.15 " "
y[1] (analytic) = 0.6799978081605684 " "
y[1] (numeric) = 0.6799978081605689 " "
absolute error = 4.4408920985006260000000000000000E-16 " "
relative error = 6.53074472477122400000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.4118781311450337 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.16 " "
y[1] (analytic) = 0.6848253424559259 " "
y[1] (numeric) = 0.6848253424559261 " "
absolute error = 2.2204460492503130000000000000000E-16 " "
relative error = 3.24235379679048200000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.423094720985276 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.17 " "
y[1] (analytic) = 0.6896650270125453 " "
y[1] (numeric) = 0.6896650270125457 " "
absolute error = 4.4408920985006260000000000000000E-16 " "
relative error = 6.43920153199220400000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.434311297716641 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.18000000000000002 " "
y[1] (analytic) = 0.6945168415403895 " "
y[1] (numeric) = 0.6945168415403893 " "
absolute error = 2.2204460492503130000000000000000E-16 " "
relative error = 3.19710900649366500000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.4455278613431237 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.19000000000000003 " "
y[1] (analytic) = 0.6993807659217643 " "
y[1] (numeric) = 0.6993807659217646 " "
absolute error = 2.2204460492503130000000000000000E-16 " "
relative error = 3.17487434233886500000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.4567444118687227 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.20000000000000004 " "
y[1] (analytic) = 0.7042567802094295 " "
y[1] (numeric) = 0.7042567802094302 " "
absolute error = 6.6613381477509390000000000000000E-16 " "
relative error = 9.45867804889292300000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.467960949297429 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.21000000000000005 " "
y[1] (analytic) = 0.7091448646247316 " "
y[1] (numeric) = 0.7091448646247311 " "
absolute error = 4.4408920985006260000000000000000E-16 " "
relative error = 6.2623200421125190000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.4791774736332437 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.22000000000000006 " "
y[1] (analytic) = 0.7140449995557634 " "
y[1] (numeric) = 0.7140449995557641 " "
absolute error = 6.6613381477509390000000000000000E-16 " "
relative error = 9.32901729148055100000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.4903939848801655 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.23000000000000007 " "
y[1] (analytic) = 0.7189571655555729 " "
y[1] (numeric) = 0.7189571655555727 " "
absolute error = 2.2204460492503130000000000000000E-16 " "
relative error = 3.08842606434622250000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.5016104830421892 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.24000000000000007 " "
y[1] (analytic) = 0.7238813433403708 " "
y[1] (numeric) = 0.7238813433403714 " "
absolute error = 5.5511151231257830000000000000000E-16 " "
relative error = 7.66854288233207700000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.5128269681233184 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.25000000000000006 " "
y[1] (analytic) = 0.7288175137877984 " "
y[1] (numeric) = 0.728817513787798 " "
absolute error = 3.33066907387546960000000000000000E-16 " "
relative error = 4.56996300289954800000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.524043440127557 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.26000000000000006 " "
y[1] (analytic) = 0.7337656579351939 " "
y[1] (numeric) = 0.7337656579351937 " "
absolute error = 2.2204460492503130000000000000000E-16 " "
relative error = 3.02609699055501800000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.53525989905891 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.2700000000000001 " "
y[1] (analytic) = 0.7387257569779107 " "
y[1] (numeric) = 0.7387257569779103 " "
absolute error = 3.33066907387546960000000000000000E-16 " "
relative error = 4.5086678546326403000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.5464763449213885 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.2800000000000001 " "
y[1] (analytic) = 0.743697792267644 " "
y[1] (numeric) = 0.7436977922676448 " "
absolute error = 7.7715611723760960000000000000000E-16 " "
relative error = 1.04498914117782480000000000000E-13 "%"
Correct digits = 16
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.5576927777190073 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.2900000000000001 " "
y[1] (analytic) = 0.7486817453107997 " "
y[1] (numeric) = 0.7486817453107989 " "
absolute error = 7.7715611723760960000000000000000E-16 " "
relative error = 1.03803267824433110000000000000E-13 "%"
Correct digits = 16
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.5689091974557874 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.3000000000000001 " "
y[1] (analytic) = 0.7536775977668664 " "
y[1] (numeric) = 0.7536775977668657 " "
absolute error = 6.6613381477509390000000000000000E-16 " "
relative error = 8.8384452018852200000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.580125604135755 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.3100000000000001 " "
y[1] (analytic) = 0.7586853314468396 " "
y[1] (numeric) = 0.7586853314468401 " "
absolute error = 5.5511151231257830000000000000000E-16 " "
relative error = 7.31675556787108400000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.591341997762941 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.3200000000000001 " "
y[1] (analytic) = 0.7637049283116544 " "
y[1] (numeric) = 0.7637049283116548 " "
absolute error = 4.4408920985006260000000000000000E-16 " "
relative error = 5.81493183279338200000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.6025583783413917 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.3300000000000001 " "
y[1] (analytic) = 0.7687363704706405 " "
y[1] (numeric) = 0.7687363704706404 " "
absolute error = 1.11022302462515650000000000000000E-16 " "
relative error = 1.44421815757910500000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.613774745875156 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.34000000000000014 " "
y[1] (analytic) = 0.7737796401800088 " "
y[1] (numeric) = 0.7737796401800083 " "
absolute error = 4.4408920985006260000000000000000E-16 " "
relative error = 5.73922066166992500000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.624991100368294 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.35000000000000014 " "
y[1] (analytic) = 0.7788347198413588 " "
y[1] (numeric) = 0.7788347198413588 " "
absolute error = 0.0 " "
relative error = 0.0 "%"
Correct digits = 16
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.6362074418248866 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.36000000000000015 " "
y[1] (analytic) = 0.783901592000209 " "
y[1] (numeric) = 0.7839015920002094 " "
absolute error = 3.33066907387546960000000000000000E-16 " "
relative error = 4.248835705738152600000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.647423770249018 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.37000000000000016 " "
y[1] (analytic) = 0.7889802393445478 " "
y[1] (numeric) = 0.788980239344548 " "
absolute error = 2.2204460492503130000000000000000E-16 " "
relative error = 2.81432403312783630000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.6586400856447963 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.38000000000000017 " "
y[1] (analytic) = 0.7940706447034058 " "
y[1] (numeric) = 0.7940706447034064 " "
absolute error = 5.5511151231257830000000000000000E-16 " "
relative error = 6.99070688502681700000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.6698563880163455 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.3900000000000002 " "
y[1] (analytic) = 0.7991727910454562 " "
y[1] (numeric) = 0.7991727910454559 " "
absolute error = 3.33066907387546960000000000000000E-16 " "
relative error = 4.16764573468320700000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.6810726773678093 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.4000000000000002 " "
y[1] (analytic) = 0.8042866614776245 " "
y[1] (numeric) = 0.8042866614776244 " "
absolute error = 1.11022302462515650000000000000000E-16 " "
relative error = 1.380382241557344700000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.6922889537033567 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.4100000000000002 " "
y[1] (analytic) = 0.8094122392437337 " "
y[1] (numeric) = 0.8094122392437334 " "
absolute error = 3.33066907387546960000000000000000E-16 " "
relative error = 4.1149230421663097000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.703505217027185 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.4200000000000002 " "
y[1] (analytic) = 0.8145495077231568 " "
y[1] (numeric) = 0.8145495077231562 " "
absolute error = 6.6613381477509390000000000000000E-16 " "
relative error = 8.1779414076018900000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.7147214673435145 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.4300000000000002 " "
y[1] (analytic) = 0.8196984504294953 " "
y[1] (numeric) = 0.8196984504294954 " "
absolute error = 1.11022302462515650000000000000000E-16 " "
relative error = 1.354428599985074700000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.7259377046566042 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.4400000000000002 " "
y[1] (analytic) = 0.8248590510092808 " "
y[1] (numeric) = 0.8248590510092809 " "
absolute error = 1.11022302462515650000000000000000E-16 " "
relative error = 1.345954831030477500000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.7371539289707516 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.45000000000000023 " "
y[1] (analytic) = 0.8300312932406859 " "
y[1] (numeric) = 0.8300312932406858 " "
absolute error = 1.11022302462515650000000000000000E-16 " "
relative error = 1.337567672045857000000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.748370140290292 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.46000000000000024 " "
y[1] (analytic) = 0.8352151610322633 " "
y[1] (numeric) = 0.8352151610322627 " "
absolute error = 6.6613381477509390000000000000000E-16 " "
relative error = 7.97559534182548200000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.7595863386196084 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.47000000000000025 " "
y[1] (analytic) = 0.8404106384216972 " "
y[1] (numeric) = 0.8404106384216973 " "
absolute error = 1.11022302462515650000000000000000E-16 " "
relative error = 1.321048275531317400000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.770802523963137 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.48000000000000026 " "
y[1] (analytic) = 0.8456177095745812 " "
y[1] (numeric) = 0.845617709574581 " "
absolute error = 1.11022302462515650000000000000000E-16 " "
relative error = 1.312913639407688000000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.7820186963253755 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
" "
"TOP MAIN SOLVE Loop"
x[1] = 0.49000000000000027 " "
y[1] (analytic) = 0.8508363587832011 " "
y[1] (numeric) = 0.8508363587832015 " "
absolute error = 4.4408920985006260000000000000000E-16 " "
relative error = 5.21944326033696900000000000000E-14 "%"
Correct digits = 17
h = 1.00E-2 " "
"NO INFO (given) for Equation 1"
Radius of convergence (ratio test) for eq 1 = 2.79323485571088 " "
"Order of pole (ratio test) Not computed"
"NO REAL POLE (three term test) for Equation 1"
"NO COMPLEX POLE (six term test) for Equation 1"
"Finished!"
"diff ( y , x , 1 ) = arcsin(sqrt(0.1 * x + 0.2));"
Iterations = 50
"Total Elapsed Time "= 0 Years 0 Days 0 Hours 0 Minutes 47 Seconds
"Elapsed Time(since restart) "= 0 Years 0 Days 0 Hours 0 Minutes 36 Seconds
"Time to Timeout "= 0 Years 0 Days 0 Hours 2 Minutes 12 Seconds
Percent Done = 102.00000000000004 "%"
(%o58) true
(%o58) diffeq.max